AirBag CAN Service Tool / SmartOBD HELP

[smart-prog]

GN15-14B321-GF

Thanks for Pinout!

[joker01]

sorry friend.....on my smart obd have 12volt and gnd to the pins 1 and 25.....
from the pinout on the photos of the sw can airbag the 12 volts and gnd are on pins 2 and 26 .......

is defected my hw???

[smart-prog]

sorry friend.....on my smart obd have 12volt and gnd to the pins 1 and 25.....
from the pinout on the photos of the sw can airbag the 12 volts and gnd are on pins 2 and 26 .......

is defected my hw???

I do not understand your question. May you have the details?

[joker01]

On my smart obd have 12volt-pin1 and gnd-pin25......
tried with tester ... anyway tonight if I can upload photos

[joker01]

c049d1f4-85ad-4106-8dec-e1ba4494d838.jpg

.....................

[joker01]

on software have this pinout...... pinout on sw.......png

[smart-prog]

Yes This Correct BUT for stirring 12 volt Use Pinout from SOFTWARE!

[joker01]

[ATTACH=CONFIG]n25231[/ATTACH]

.....................

Ok....thanks.....
But is normal my smart obd......???

[smart-prog]

Yes! its normal

[MJTSerwis]

Hello, I have a problem with removing crash data in AL3414B321FA Ford F-150 driver. Interface connects and reads errors, but erroneously reads EEPROM content as a completely filled zeros. Log in attachment.

[smart-prog]

Hello, I have a problem with removing crash data in AL3414B321FA Ford F-150 driver. Interface connects and reads errors, but erroneously reads EEPROM content as a completely filled zeros. Log in attachment.

Please open ECU for check what CPU inside and post here!

[MJTSerwis]

Please open ECU for check what CPU inside and post here!

Hello, it's Infineon SAH-XC2361A-56F80L34 This module also have separate PCB for acceleration measure connected by soldering on flexible wired tape.

[smart-prog]

i have now BR33-14B321-AF same CPU and same problem... Please wait i make solution!

[MJTSerwis]

Hello, any updates about AL34-14B321-FA?

[smart-prog]

Update 2 days ago!