2024 Ford Ranger PB3T-14B321-BB

[voldoverse]

Hi, i have this 2024 Ford Ranger, it has a TC23xxx-24F chip

The part number is not listed but ive tried using other for models using the same chip but seems like the password check fails

Also tried reading with CPT but gives jtag protection error, i am unfortunately not skilled with fancy UART connections

So basically just requesting that this module be added to CAN service tool as soon as a password is available.


Car model: 2024 Ford Ranger T9
Part no: PB3T-14B321-BB
Memory : TC23xxx-24F

--------------------------------------------------------
Start Automatic Mode MB6T-14B321-ZE
--------------------------------------------------------
DC power supply voltage +12,48V
Turn on 12V on the adapter... ok
Enter Diagnostic Session... ok
Read Part Number... PB3T-14B321-BB
Read SW Number... PB3T-14C028-AA
Read HW Number... PB3T-14F136-BB
Read Serial Number... Y0260991teA
Read Original VIN... AFAPXXMJ2PRR65616
Read Current VIN... AFAPXXMJ2PRR65616
Read Errors...
B0001:13-8B - DRIVER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0004:13-8B - DRIVER KNEE BOLSTER DEPLOYMENT CONTROL (Circuit Open)
B0010:11-08 - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Short To Ground)
B0010:13-8B - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B007E:13-8B - DRIVER SEATBELT PRETENSIONER "C" DEPLOYMENT CONTROL (Circuit Open)
B007F:11-08 - PASSENGER SEATBELT PRETENSIONER "C" DEPLOYMENT CONTROL (Circuit Short To Ground)
B007F:13-8B - PASSENGER SEATBELT PRETENSIONER "C" DEPLOYMENT CONTROL (Circuit Open)
B1193:00-8B - !!! CRASH EVENT STORAGE FULL AND LOCKED !!!
B11D8:13-0B - RESTRAINT EVENT NOTIFICATION (Circuit Open)
B1404:13-8B - DRIVER POWER WINDOW DOWN CIRCUIT OPEN (Circuit Open)
B1405:13-8B - DRIVER POWER WINDOW DOWN CIRCUIT SHORT TO BATTERY (Circuit Open)
B1407:13-8B - DRIVER POWER WINDOW UP CIRCUIT OPEN (Circuit Open)
B1408:13-8B - DRIVER POWER WINDOW UP CIRCUIT SHORT TO BATTERY (Circuit Open)
B1408:1A-08 - DRIVER POWER WINDOW UP CIRCUIT SHORT TO BATTERY (Circuit Resistance Below Threshold)
B1414:13-8B - POWER WINDOW LR MOTOR CIRCUIT FAILURE (Circuit Open)
B1415:13-8B - POWER WINDOW LR MOTOR CIRCUIT OPEN (Circuit Open)
B1416:13-8B - POWER WINDOW LR MOTOR CIRCUIT SHORT TO BATTERY (Circuit Open)
B1417:13-8B - POWER WINDOW LR MOTOR CIRCUIT SHORT TO GROUND (Circuit Open)
B1418:13-8B - PASSENGER POWER WINDOW MOTOR CIRCUIT FAILURE (Circuit Open)
B1419:13-8B - PASSENGER POWER WINDOW MOTOR CIRCUIT OPEN (Circuit Open)
B141A:13-8B - DRIVER POWER WINDOW MOTOR STALLED (Circuit Open)
B1492:68-48 - IGNITION CYLINDER SENSOR OPEN CIRCUIT (Event information)
U0100:00-8B - LOST COMMUNICATION WITH ECM/PCM
U0140:00-8B - LOST COMMUNICATION WITH BODY CONTROL MODULE (GEM)
U3003:16-08 - BATTERY VOLTAGE (Circuit Voltage Below Threshold)
B1413:13-8B - DRIVER POWER WINDOW MOTOR CIRCUIT SHORT TO GROUND (Circuit Open)

--------------------------------------------------------
--------------------------------------------------------
DC power supply voltage +12,55V
Turn on 12V on the adapter... ok
Read Part Number... PB3T-14B321-BB
Enter Diagnostic Session... ok
Get Seed... ok
Enter Password... failed

[smart-prog]

Please Check What CPU ???? TC23xx or TC33xx

[voldoverse]

Please Check What CPU ???? TC23xx or TC33xx

TC23xx ...... its in my original post?

TC233LP-24F to be super accurate

[AST_Support]

Have you tried to read it? Is the MCU locked?

[voldoverse]

Have you tried to read it? Is the MCU locked?

all the details are in my original post, as well as the log for AST CAN tool, the forum is so strict on providing the details correctly but then nobody reads it?

also tried reading with CPT but gives jtag protection error

[AST_Support]

Sorry about that.
We cannot fix this in AirbagCANServiceTool until all MCU databanks are read.

[voldoverse]

Sorry about that.
We cannot fix this in AirbagCANServiceTool until all MCU databanks are read.

ok thanks, do you know if uart is possible without lifting pin like land rover or does pin have to be lifted for uart?

[AST_Support]

I don't have pinout for this model.
Pin should be lifted and connected to GND.

[vankeo]

Hello
Anyone has solved this problem yet?
Regards

[RS4]

Hello Everyone, can someone share a pin out for this ecu please ?
Thanks

[ABT2015]

Hello Everyone, can someone share a pin out for this ecu please ?
Thanks

MCU diagram is in pinout section

Pinouts - CarProTool

[vankeo]

Hello
Do you need Uart Pin Out?
Regards

[ABT2015]

Hello
Do you need Uart Pin Out?
Regards

Yes, UART pinout is available in pinout section.

[vankeo]

Hello
I only see Range Rover Uart.
Ford Uart I cannot look for it.
Could you send me?
Regards

[ABT2015]

MCU diagram is inside same folder...