Hyundai Tucson 95910-d7230

[mahdyonline]

First write Original and CHeck code B1620

i jtag and write orginal dump (with crash)
have this error too

95910-D7230
Read Errors... ok
B1620:00-89 - INTERNAL FAULT-REPLACE SRSCM
B1329:00-89 - FIS FRONT IMPACT SENSOR -DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS FRONT IMPACT SENSOR -PASSENGER COMMUNICATION ERROR
B1742:00-89 - P-SIS FRONT-DRIVER COMMUNICATION ERROR
B1748:00-89 - P-SIS FRONT-PASSENGER COMMUNICATION ERROR
B1409:00-89 - SIS SIDE IMPACT SENSOR FRONT-DRIVER COMMUNICATION ERROR
B1410:00-89 - SIS SIDE IMPACT SENSOR FRONT-PASSENGER COMMUNICATION ERROR
B1412:00-89 - OPEN BETWEEN SIS AND SRSCM
B1413:00-89 - SIDE IMPACT SENSOR (SIS) MALFUNCTION
B1527:00-89 - PASSENGER AIRBAG ON-OFF SWITCH OPEN OR SHORT TO BATTERY
B2505:00-89 - Unknown Error

[smart-prog]

This dump not have CRASH record!!!! This dump have INTERNAL FAULT! Find original dump!

[mahdyonline]

This dump not have CRASH record!!!! This dump have INTERNAL FAULT! Find original dump!

did u have?

[mahdyonline]

download dump from tachosoft but same error

[ASCII]

Hi,

I have also one strange problem on the unit 95910-D7230, from Hyundai Tucson 2017 with "B1620:00-89 - !!! INTERNAL FAULT !!!", know how to fix this, is one real problem or not ?

Log before clear:

B1649:00-89 - Unknown Error
B1620:00-89 - !!! INTERNAL FAULT !!!
B1742:00-89 - P-SIS FRONT-DRIVER COMMUNICATION ERROR
B1329:00-89 - FIS FRONT IMPACT SENSOR -DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS FRONT IMPACT SENSOR -PASSENGER COMMUNICATION ERROR
B1748:00-89 - P-SIS FRONT-PASSENGER COMMUNICATION ERROR
B1409:00-89 - SIS SIDE IMPACT SENSOR FRONT-DRIVER COMMUNICATION ERROR
B1410:00-89 - SIS SIDE IMPACT SENSOR FRONT-PASSENGER COMMUNICATION ERROR
B1412:00-89 - OPEN BETWEEN SIS AND SRSCM
B1413:00-89 - SIDE IMPACT SENSOR (SIS) MALFUNCTION
B1527:00-89 - PASSENGER AIRBAG ON-OFF SWITCH OPEN OR SHORT TO BATTERY
B2500:00-89 - WARNING LAMP FAILURE

Log after clear:

B1620:00-89 - !!! INTERNAL FAULT !!!
B1329:00-89 - FIS FRONT IMPACT SENSOR -DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS FRONT IMPACT SENSOR -PASSENGER COMMUNICATION ERROR
B1742:00-89 - P-SIS FRONT-DRIVER COMMUNICATION ERROR
B1748:00-89 - P-SIS FRONT-PASSENGER COMMUNICATION ERROR
B1409:00-89 - SIS SIDE IMPACT SENSOR FRONT-DRIVER COMMUNICATION ERROR
B1410:00-89 - SIS SIDE IMPACT SENSOR FRONT-PASSENGER COMMUNICATION ERROR
B1412:00-89 - OPEN BETWEEN SIS AND SRSCM
B1413:00-89 - SIDE IMPACT SENSOR (SIS) MALFUNCTION
B1527:00-89 - PASSENGER AIRBAG ON-OFF SWITCH OPEN OR SHORT TO BATTERY
B1346:00-89 - DRIVER AIRBAG RESISTANCE TOO HIGH 1ST STAGE


After clear by Smart OBD and withe the memory of unit, remain this strange DTC "B1620:00-89 - !!! INTERNAL FAULT !!!"

Thanks.

[smart-prog]

You have Original Error : B1620:00-89 - !!! INTERNAL FAULT !!! find work dump!

[ASCII]

You have Original Error : B1620:00-89 - !!! INTERNAL FAULT !!! find work dump!

I test also with 100% dumps OK and had the same problem until I find the problem.

The problem was when I read and write, need to be in the same offset level like in car because had giroscopic sensor level, I read it in desk and not was in the same position like in car the unit.

[smart-prog]

Thanks for info!!!!! but if you put to ecu 12 volt, ecu must have same possition in car!!!! AND NOT ROTATE!!!