HOW TO READ AND WRITE INFINEON CPU BY CPT PROGRAMMER

[CPT]

How to read Infineon xc2xxx CPU by Carprotool Programmer

1. Connect all test points like on connection diagrams
2. Connect external 12V to SRS unit ( black CPT power adapter not required)
3. Connect RJ48 Cable to CPT Programmer
4. Select correct CPU name and CPU bank ( CRASH DATA available in bank1 64kb)
5. Click on Read button ( wait about 20 sec. for read data )
6. Click save button and save file on your hdd

How to write data with verification to CPU Infineon xc2xxx by CarProTool Programmer

1. Disconnect and connect again external 12V
2. Disconnect and connect again RJ48 Cable in CPT
2. Click Open button and add correct file to buffer
3. Select Auto Verify (available in Write button from right site)
4. Click Write button ( wait for write data and verification)

YouTube Video:

Best Regards

CarProTool Support Team

[josimar peroni]

reading and writing ok .... the problem and read .not and clear pinouts diagram example: what do jamper ???: and must unite pins 2e4e34e38e39e40 this and doubts .... grateful who can help me

[alexbez]

xc23xx idcode: 0017e083! Can't connect to Target!

[alexbez]

please help me

[alexbez]

all the wires are soldered as you have written to kd45 57k30b

[smart-prog]

All pinout's here : 403 Error

[smart-prog]

Make PCB photo and post here!

[alexbez]

My whole problem is the Reset output. Short to ground. The problem is badly soldered jumper.Sorry for lost time.

[otocheck]

898146938Y DMAX read flash 0 area ok,but can write back 384 kb.4000 to eof protecting ??
bank1 64kb read full 00,and I think crash area in that area

now I need clear 64 kb dump for this ecu please,and valid flash backup..write all map available ??

PLEASE I need backup for this ecu


I have same problem : Problems reading Isuzu D-Max SRS ECU 898146938Y Infineon - CarProTool

[otocheck]

our connection is correction

[otocheck]

again reading for dump
Compare

[otocheck]

any idea please ??? ecu still crash stored

[smart-prog]

You write clear dump?

[Abdul Latif]

again reading for dump
Compare

is it cleared file ?

[amir khan]

PART NUMBER :EB3T-14B321-FF