problem with airbag light after the crash

[readyforairbag]

Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... failed
DC power supply voltage +13.07V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... failed
Enter Diagnostic Session... ok
Read Part Number... 95910BE100
Read ACU Coding... BE02
Read Errors...
B1652:00-89 - !!! CRASH RECORDED IN PASSENGER SIDE AIRBAG !!!
B16D9:00-08 - (history) Unknown Error
B1513:00-08 - (history) PASSENGER BELT SWITCH-OPEN/SHORT TO BATTERY
B1730:00-08 - (history) ANCHOR PRETENSIONER FRONT-DRIVER RESISTANCE TOO HIGH
B1734:00-08 - (history) ANCHOR PRETENSIONER FRONT-PASSENGER RESISTANCE TOO HIGH
B14AE:00-08 - (history) Unknown Error
B1748:00-08 - (history) P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-PASSENGER COMMUNICATION ERROR
B1490:00-89 - OCS(OCCUPANT CLASSIFICATION SYSTEM) DEFECT

--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... failed
DC power supply voltage +13.07V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... failed
Enter Diagnostic Session... ok
Get Seed... ok
Enter Pass... ok
Clear Crash... ok

--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... failed
DC power supply voltage +13.04V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... failed
Enter Diagnostic Session... ok
Clear Errors... failed
--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... failed
DC power supply voltage +13.02V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... failed
Enter Diagnostic Session... ok
Read Part Number... 95910BE100
Read ACU Coding... BE02
Read Errors... no errors

after the clear crash by obd the airbag light still on
and all the airbag is disappear

[AST_Support]

Make all car diagnostics, maybe there is a problem with OCS(OCCUPANT CLASSIFICATION SYSTEM).

[readyforairbag]

i removed the seat airbag connector but it didn't show the error in the DTC
also the curtain airbag and seatbelt

I mean after the clear only driver and passenger airbag remain

[AST_Support]

Try turning the ignition off and on after any operation with the airbags.

[readyforairbag]

thank you

I did it on bench work correctly

Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... ok
CANFD Adapter FW version... v1.4
Checking security... ok
DC power supply voltage +11.85V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... ok
Enter Diagnostic Session... ok
Read Part Number... 95910BE100
Read ACU Coding... BE02
Read Errors...
B1329:00-89 - FIS(FRONT IMPACT SENSOR)-DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS(FRONT IMPACT SENSOR)-PASSENGER COMMUNICATION ERROR
B1409:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-DRIVER COMMUNICATION ERROR
B1410:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-PASSENGER COMMUNICATION ERROR
B1742:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-DRIVER COMMUNICATION ERROR
B1748:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-PASSENGER COMMUNICATION ERROR
B1511:00-89 - DRIVER BELT SWITCH-OPEN/SHORT TO BATTERY
B1513:00-89 - PASSENGER BELT SWITCH-OPEN/SHORT TO BATTERY
B1346:00-89 - DRIVER AIR BAG(DAB) RESISTANCE-HIGH
B1352:00-89 - PASSENGER AIR BAG(PAB) RESISTANCE-HIGH

--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... ok
CANFD Adapter FW version... v1.4
Checking security... ok
DC power supply voltage +11.89V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... ok
Enter Diagnostic Session... ok
Get Seed... ok
Enter Pass... ok
Clear Crash... ok

--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... ok
CANFD Adapter FW version... v1.4
Checking security... ok
DC power supply voltage +11.85V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... ok
Enter Diagnostic Session... ok
Clear Errors... ok

--------------------------------------------------------
Turn on 3/5V on the adapter... ok
CANFD Adapter Connect... ok
CANFD Adapter FW version... v1.4
Checking security... ok
DC power supply voltage +11.86V
Turn on 12V on the adapter... ok
Connect to CANFD Adapter... ok
Enter Diagnostic Session... ok
Read Part Number... 95910BE100
Read ACU Coding... BE02
Read Errors...
B1361:00-89 - PRETENSIONER FRONT-DRIVER RESISTANCE TOO HIGH
B1367:00-89 - PRETENSIONER FRONT-PASSENGER RESISTANCE TOO HIGH
B1730:00-89 - ANCHOR PRETENSIONER FRONT-DRIVER RESISTANCE TOO HIGH
B1734:00-89 - ANCHOR PRETENSIONER FRONT-PASSENGER RESISTANCE TOO HIGH
B136A:00-89 - PRETENSIONER REAR-DRIVER RESISTANCE TOO HIGH
B2502:00-89 - WARNING LAMP 2
B136E:00-89 - PRETENSIONER REAR-PASSENGER RESISTANCE TOO HIGH
B1378:00-89 - SIDE AIRBAG FRONT-DRIVER RESISTANCE TOO HIGH
B1382:00-89 - SIDE AIRBAG FRONT-PASSENGER RESISTANCE TOO HIGH
B1473:00-89 - INFLATABLE CURTAIN AIRBAG DRIVER RESISTANCE TOO HIGH