SmartOBD Read Error on Renesas Request for Support

[readyforairbag]

I hope you’re doing well. I’m reaching out because I’ve run into an issue with my SmartOBD whenever I’m trying to read a Renesas processor.
Specifically, I’m getting a “failed read address 0x00E000” error when it tries to read the code flash.

Could you please advise on what might be causing this or if there’s a known fix?

Thanks a lot for your help!


Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 14.46.05.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 14.46.12.bin" ok
Read CodeFlash... failed Read Addr 00014000
------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,,,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 14.55.14.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 14.55.21.bin" ok
Read CodeFlash... failed Read Addr 00040E00
================================================== =========
Processing... 05.10.2025 15.01.23
Checking new version... ok
Connection to server... ok
Checking security... ok
Start Manual Mode.
Tesla Bosch 1512876-00-E R7F701330
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 15.03.02.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 15.03.08.bin" ok
Read CodeFlash... failed Read Addr 00020100
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 15.36.45.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 15.36.46.bin" ok
Read CodeFlash... failed Read Addr 0008F900
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 15.40.57.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 15.41.03.bin" ok
Read CodeFlash... failed Read Addr 00086E00
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,,,,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 16.10.26.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 16.10.27.bin" ok
Read CodeFlash... failed Read Addr 00049E00
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 16.19.54.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 16.19.56.bin" ok
Read CodeFlash... failed Read Addr 000E5B00
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 16.28.47.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 16.28.54.bin" ok
Read CodeFlash... failed Read Addr 00116200
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850 P1x-C
RH850-P1 counters - 5
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Tesla 1512876-00-E R7F701330 OPT 05.10.2025 16.49.07.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Tesla 1512876-00-E R7F701330 CodeFlash 05.10.2025 16.49.28.bin" ok
Read CodeFlash... failed Read Addr 00020200
--------------------------------------------------------

[readyforairbag]

SmartProg adapter test...
Test P1-P2... ok
Test P3-P4... ok
Test P5-P6... ok
Test P7-P8... ok
Test 5V... ok
Test 3V... ok

[AST_Support]

Try to Update and Reboot Windows.

[An Xe Hoi]

did you solve the problem, i am having the same error.

Mazda Bosch KGVT-57K30-C R7F701330 - CarProTool

[Seven7i]

Tesla Model Y Bosch 1512876-00-E R7F701330
--------------------------------------------------------
DC power supply voltage +11.99V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
DC power supply voltage +12V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
The connection is lost, close this window and press the [Do It] button again.
--------------------------------------------------------
DC power supply voltage +12.01V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850-P1
RH850-P1 tokens - 10
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,failed
--------------------------------------------------------
DC power supply voltage +12V
Turn on 12V on the adapter... ok
Set Service Mode... failed

[Seven7i]

Tesla Model Y Bosch 1512876-00-E R7F701330
--------------------------------------------------------
DC power supply voltage +11.99V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
DC power supply voltage +12V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
The connection is lost, close this window and press the [Do It] button again.
--------------------------------------------------------
DC power supply voltage +12.01V
Turn on 12V on the adapter... ok
Set Service Mode... failed
--------------------------------------------------------
Connect MCU... ok
Get device type... RH850-P1
RH850-P1 tokens - 10
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701330A
CodeFlashSize = 00200000
DataFlashSize = 00018000
UserBootSize = 00000000
Read ICUS Status... Off
Read Option Bytes... failed
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,,,failed
--------------------------------------------------------
DC power supply voltage +12V
Turn on 12V on the adapter... ok
Set Service Mode... failed

[AST_Support]

The P8 and GND2 wires must be shorter than 5 cm.

[Seven7i]

Tesla Model Y Bosch 1512876-00-E R7F701330
--------------------------------------------------------
DC power supply voltage +11.97V
Turn on 12V on the adapter... ok
Set Service Mode... ok
Read Part Number... 1512876-00-E
Read Serial Number... 2D22603903AA11
Read VIN Number... 7SAYGAEE7PF857018
Read configuration... 83FF3F1B130000CF03030000BE0100085801971E0000000000
Read Boot CRC... FF55FA43
Read App CRC... B47C98FB
Read Errors...
B0001:13-AF - DRIVER FRONTAL STAGE 1 (Circuit Open)
B0002:13-AF - DRIVER FRONTAL STAGE 2 (Circuit Open)
B0004:13-AF - DRIVER KNEE BOLSTER (Circuit Open)
B0005:13-AF - COLLAPSIBLE STEERING COLUMN (Circuit Open)
B0010:13-AF - PASSENGER FRONTAL STAGE 1 (Circuit Open)
B0011:13-AF - PASSENGER FRONTAL STAGE 2 (Circuit Open)
B0020:13-AF - LEFT SIDE AIRBAG (Circuit Open)
B0021:13-AF - LEFT CURTAIN 1 (Circuit Open)
B0027:13-A3 - Unknown Error (Circuit Open)
B0028:13-AF - RIGHT SIDE AIRBAG (Circuit Open)
B0029:13-AF - RIGHT CURTAIN 1 (Circuit Open)
B0073:13-AF - SECOND ROW LEFT SEATBELT PRETENSIONER (Circuit Open)
B0075:13-AF - SECOND ROW RIGHT SEATBELT PRETENSIONER (Circuit Open)
B0080:13-A3 - DRIVER SEATBELT LOAD LIMITER (Circuit Open)
B0082:13-AF - PASSENGER SEATBELT LOAD LIMITER (Circuit Open)
B0090:13-A3 - LEFT FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0091:13-A3 - LEFT SIDE RESTRAINTS SENSOR 1 (Circuit Open)
B0091:4A-AD - LEFT SIDE RESTRAINTS SENSOR 1 (Incorrect Component Installed)
B0093:13-A3 - LEFT SIDE RESTRAINTS SENSOR 3 (Circuit Open)
B0093:4A-AD - LEFT SIDE RESTRAINTS SENSOR 3 (Incorrect Component Installed)
B0094:13-AF - CENTER FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0095:13-AF - RIGHT FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0096:13-A3 - RIGHT SIDE RESTRAINTS SENSOR 1 (Circuit Open)
B0096:4A-AD - RIGHT SIDE RESTRAINTS SENSOR 1 (Incorrect Component Installed)
B11A0:13-A3 - LEFT SIDE RESTRAINTS PRESSURE SENSOR (Circuit Open)
B11A1:13-A3 - RIGHT SIDE RESTRAINTS PRESSURE SENSOR (Circuit Open)
B11B0:13-A3 - SCAN BUTTON (Circuit Open)
B11B1:13-A3 - AUTO BUTTON (Circuit Open)
B11CD:13-AF - DRIVER FRONTAL AIRBAG CANISTER VENT (Circuit Open)
B11CF:13-AF - PASSENGER FRONTAL AIRBAG CANNISTER VENT (Circuit Open)
B1211:13-AF - DRIVER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1214:13-AF - PASSENGER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1408:13-AF - PASSENGER SIDE CURTAIN AIRBAG (Circuit Open)
B1409:13-AF - DRIVER POWER WINDOW UP CIRCUIT SHORT TO GROUND (Circuit Open)
U0004:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) LOW (Missing messages)
U0005:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) HIGH (Missing messages)
U0006:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) OPEN (Missing messages)
U0007:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) LOW (Missing messages)
U0009:02-2F - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (General Signal Failure)
U0009:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (Missing messages)
U000C:87-23 - Unknown Error (Missing messages)
U0045:00-23 - VEHICLE COMMUNICATION BUS B (-) SHORTED TO BUS B (+)
U010F:87-23 - LOST COMMUNICATION WITH AIR CONDITIONING CONTROL MODULE (Missing messages)
U0110:87-23 - LOST COMMUNICATION WITH DRIVE MOTOR CONTROL MODULE A (Missing messages)
U0360:87-23 - Unknown Error (Missing messages)
U0361:87-23 - Unknown Error (Missing messages)
U0362:87-23 - Unknown Error (Missing messages)
U0657:87-23 - Unknown Error (Missing messages)
U0758:87-A3 - Unknown Error (Missing messages)
U095A:87-23 - Unknown Error (Missing messages)
U0A5B:87-23 - Unknown Error (Missing messages)
U3E5C:87-23 - Unknown Error (Missing messages)

[Seven7i]

every thing went good it used two token but im still getting error

[Seven7i]

Tesla Model Y Bosch 1512876-00-E R7F701330
--------------------------------------------------------
DC power supply voltage +11.98V
Turn on 12V on the adapter... ok
Set Service Mode... ok
Read Part Number... 1512876-00-E
Read Serial Number... 2D21603486AA11
Read VIN Number... 7SAYGAEE7PF857018
Read configuration... 83FF3F1B130000CF03030000BE0100085801970F0000000000
Read Boot CRC... FF55FA43
Read App CRC... B853ED9E
Read Errors...
C1607:87-23 - Unknown Error (Missing messages)
B0001:13-AD - DRIVER FRONTAL STAGE 1 (Circuit Open)
B0002:13-AD - DRIVER FRONTAL STAGE 2 (Circuit Open)
B0004:13-AD - DRIVER KNEE BOLSTER (Circuit Open)
B0005:13-AD - COLLAPSIBLE STEERING COLUMN (Circuit Open)
B0010:13-AD - PASSENGER FRONTAL STAGE 1 (Circuit Open)
B0011:13-AD - PASSENGER FRONTAL STAGE 2 (Circuit Open)
B0020:13-AD - LEFT SIDE AIRBAG (Circuit Open)
B0021:13-AD - LEFT CURTAIN 1 (Circuit Open)
B0027:13-AD - Unknown Error (Circuit Open)
B0028:13-AD - RIGHT SIDE AIRBAG (Circuit Open)
B0029:13-AD - RIGHT CURTAIN 1 (Circuit Open)
B0073:13-AD - SECOND ROW LEFT SEATBELT PRETENSIONER (Circuit Open)
B0075:13-AD - SECOND ROW RIGHT SEATBELT PRETENSIONER (Circuit Open)
B0080:13-AD - DRIVER SEATBELT LOAD LIMITER (Circuit Open)
B0082:13-AD - PASSENGER SEATBELT LOAD LIMITER (Circuit Open)
B11CD:13-AD - DRIVER FRONTAL AIRBAG CANISTER VENT (Circuit Open)
B11CF:13-AD - PASSENGER FRONTAL AIRBAG CANNISTER VENT (Circuit Open)
B1211:13-AD - DRIVER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1214:13-AD - PASSENGER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1408:13-AD - PASSENGER SIDE CURTAIN AIRBAG (Circuit Open)
B1409:13-AD - DRIVER POWER WINDOW UP CIRCUIT SHORT TO GROUND (Circuit Open)
U0004:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) LOW (Missing messages)
U0005:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) HIGH (Missing messages)
U0006:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) OPEN (Missing messages)
U0007:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) LOW (Missing messages)
U0008:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) HIGH (Missing messages)
U0009:02-2F - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (General Signal Failure)
U0009:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (Missing messages)
U000A:87-23 - Unknown Error (Missing messages)
U000B:87-23 - Unknown Error (Missing messages)
U000C:87-23 - Unknown Error (Missing messages)
U000D:87-23 - Unknown Error (Missing messages)
U0045:00-23 - VEHICLE COMMUNICATION BUS B (-) SHORTED TO BUS B (+)
U010F:87-23 - LOST COMMUNICATION WITH AIR CONDITIONING CONTROL MODULE (Missing messages)
U0455:87-AF - INVALID DATA RECEIVED FROM RESTRAINTS OCCUPANT CLASSIFICATION SYSTEM MODULE (Missing messages)
U0557:87-23 - INVALID DATA RECEIVED FROM FRONT CONTROLS INTERFACE MODULE „A“ (Missing messages)
U0657:87-23 - Unknown Error (Missing messages)
U0758:87-AF - Unknown Error (Missing messages)
U095A:87-23 - Unknown Error (Missing messages)
U0A5B:87-23 - Unknown Error (Missing messages)
U0C5D:87-23 - Unknown Error (Missing messages)
U0D56:87-23 - Unknown Error (Missing messages)
U3000:49-AD - !!! CONTROL MODULE INTERNAL FAILURE !!! (Internal electronic failure)
U3E5C:87-23 - Unknown Error (Missing messages)

[AST_Support]

This error indicates an internal electronic fault, check the capacitor soldering or a short circuit on the MCU.

[Seven7i]

Tesla Model Y Bosch 1512876-00-E R7F701330 --------------------------------------------------------
DC power supply voltage +11.97V
Turn on 12V on the adapter... ok
Set Service Mode... ok
Read Part Number... 1512876-00-E
Read Serial Number... 2D22603903AA11
Read VIN Number... 7SAYGAEE7PF857018
Read configuration... 83FF3F1B130000CF03030000BE0100085801971E0000000000
Read Boot CRC... FF55FA43
Read App CRC... B47C98FB
Read Errors...
B0001:13-AF - DRIVER FRONTAL STAGE 1 (Circuit Open)
B0002:13-AF - DRIVER FRONTAL STAGE 2 (Circuit Open)
B0004:13-AF - DRIVER KNEE BOLSTER (Circuit Open)
B0005:13-AF - COLLAPSIBLE STEERING COLUMN (Circuit Open)
B0010:13-AF - PASSENGER FRONTAL STAGE 1 (Circuit Open)
B0011:13-AF - PASSENGER FRONTAL STAGE 2 (Circuit Open)
B0020:13-AF - LEFT SIDE AIRBAG (Circuit Open)
B0021:13-AF - LEFT CURTAIN 1 (Circuit Open)
B0027:13-A3 - Unknown Error (Circuit Open)
B0028:13-AF - RIGHT SIDE AIRBAG (Circuit Open)
B0029:13-AF - RIGHT CURTAIN 1 (Circuit Open)
B0073:13-AF - SECOND ROW LEFT SEATBELT PRETENSIONER (Circuit Open)
B0075:13-AF - SECOND ROW RIGHT SEATBELT PRETENSIONER (Circuit Open)
B0080:13-A3 - DRIVER SEATBELT LOAD LIMITER (Circuit Open)
B0082:13-AF - PASSENGER SEATBELT LOAD LIMITER (Circuit Open)
B0090:13-A3 - LEFT FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0091:13-A3 - LEFT SIDE RESTRAINTS SENSOR 1 (Circuit Open)
B0091:4A-AD - LEFT SIDE RESTRAINTS SENSOR 1 (Incorrect Component Installed)
B0093:13-A3 - LEFT SIDE RESTRAINTS SENSOR 3 (Circuit Open)
B0093:4A-AD - LEFT SIDE RESTRAINTS SENSOR 3 (Incorrect Component Installed)
B0094:13-AF - CENTER FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0095:13-AF - RIGHT FRONTAL RESTRAINTS SENSOR (Circuit Open)
B0096:13-A3 - RIGHT SIDE RESTRAINTS SENSOR 1 (Circuit Open)
B0096:4A-AD - RIGHT SIDE RESTRAINTS SENSOR 1 (Incorrect Component Installed)
B11A0:13-A3 - LEFT SIDE RESTRAINTS PRESSURE SENSOR (Circuit Open)
B11A1:13-A3 - RIGHT SIDE RESTRAINTS PRESSURE SENSOR (Circuit Open)
B11B0:13-A3 - SCAN BUTTON (Circuit Open)
B11B1:13-A3 - AUTO BUTTON (Circuit Open)
B11CD:13-AF - DRIVER FRONTAL AIRBAG CANISTER VENT (Circuit Open)
B11CF:13-AF - PASSENGER FRONTAL AIRBAG CANNISTER VENT (Circuit Open)
B1211:13-AF - DRIVER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1214:13-AF - PASSENGER SEATBELT RETRACTOR PRETENSIONER (Circuit Open)
B1408:13-AF - PASSENGER SIDE CURTAIN AIRBAG (Circuit Open)
B1409:13-AF - DRIVER POWER WINDOW UP CIRCUIT SHORT TO GROUND (Circuit Open)
U0004:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) LOW (Missing messages)
U0005:87-23 - HIGH SPEED CAN COMMUNICATION BUS (+) HIGH (Missing messages)
U0006:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) OPEN (Missing messages)
U0007:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) LOW (Missing messages)
U0009:02-2F - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (General Signal Failure)
U0009:87-23 - HIGH SPEED CAN COMMUNICATION BUS (-) SHORTED TO BUS (+) (Missing messages)
U000C:87-23 - Unknown Error (Missing messages)
U0045:00-23 - VEHICLE COMMUNICATION BUS B (-) SHORTED TO BUS B (+)
U010F:87-23 - LOST COMMUNICATION WITH AIR CONDITIONING CONTROL MODULE (Missing messages)
U0110:87-23 - LOST COMMUNICATION WITH DRIVE MOTOR CONTROL MODULE A (Missing messages)
U0360:87-23 - Unknown Error (Missing messages)
U0361:87-23 - Unknown Error (Missing messages)
U0362:87-23 - Unknown Error (Missing messages)
U0657:87-23 - Unknown Error (Missing messages)
U0758:87-A3 - Unknown Error (Missing messages)
U095A:87-23 - Unknown Error (Missing messages)
U0A5B:87-23 - Unknown Error (Missing messages)
U3E5C:87-23 - Unknown Error (Missing messages)

[Seven7i]

Do you see any thing wrong in here

[AST_Support]

Everything is fine.

[Seven7i]

It still showing crash data while I do it twice