Nissan nv200 light on after clean

[dkal_3]

CAR BRAND NAME: NISSAN
MODEL: NV200
PART NUMBER: 98820-9SE0A
CPU / EEPROM:95128


Hello, I have an NV200 module after cleaning it on bench, the airbag light is still on, there are no codes, I have tried with 2 different modules and the lamp always stays on.

I had already made NV200 before and they were perfect, I don't know if it's due to some update since now only 3 buttons appear, and before I could read memory, and now I can't, only read dtc, clean crash and clean errors

Log
Start Manual Mode for 98820 9SE0A
Enable 12V on Extended Connector... ok
External power +11.74V
Connecting... ok
Nissan SRS Type 1
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
98820-9SE0A
Set ServiceMode... ok
Read Errors...
B1209:00-09 - !!! FRONTAL COLLISION AIR BAG CONTROL UNIT SYSTEM !!!
B1210:00-09 - !!! SIDE COLLISION AIR BAG CONTROL UNIT SYSTEM !!!
B1049:00-09 - DRIVER AIR BAG MODULE CIRCUIT (DR1) IS OPEN
B1054:00-09 - Unknown Error
B1081:00-09 - RH SEAT BELT PRE-TENSIONER CIRCUIT IS OPEN
B1086:00-09 - LH SEAT BELT PRE-TENSIONER CIRCUIT IS OPEN
B1134:00-09 - FRONT LH SIDE AIR BAG MODULE CIRCUIT IS OPEN
B1150:00-09 - LH SIDE CURTAIN AIR BAG MODULE CIRCUIT IS OPEN
B1035:00-09 - CRASH ZONE SENSOR COMMUNICATION ERROR
B1115:00-09 - RH SIDE AIR BAG SATELLITE SENSOR COMMUNI-CATION ERROR
B1120:00-09 - LH SIDE AIR BAG SATELLITE SENSOR COMMUNI-CATION ERROR
B1338:00-09 - FRONT DOOR SATELLITE SENSOR RH COMMUNICATION
B1345:00-09 - Unknown Error
B1023:00-09 - FRONT PASSENGER AIRBAG ON-OFF INDICATOR CIRCUIT
B1065:00-09 - FRONT PASSENGER AIR BAG MODULE CIRCUIT (AS1) IS OPEN
B1070:00-09 - FRONT PASSENGER AIR BAG MODULE CIRCUIT (AS2) IS OPEN

Enable 12V on Extended Connector... ok
External power +11.74V
Enter Diagnostic Session... ok
Clear crash... ok

Enable 12V on Extended Connector... ok
External power +11.73V
Set ServiceMode... ok
Clear errors... ok

Enable 12V on Extended Connector... ok
External power +11.72V
Connecting... ok
Nissan SRS Type 1
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
98820-9SE0A
Set ServiceMode... ok
Read Errors...
B1023:00-09 - FRONT PASSENGER AIRBAG ON-OFF INDICATOR CIRCUIT
B1049:00-09 - DRIVER AIR BAG MODULE CIRCUIT (DR1) IS OPEN
B1054:00-09 - Unknown Error
B1081:00-09 - RH SEAT BELT PRE-TENSIONER CIRCUIT IS OPEN
B1086:00-09 - LH SEAT BELT PRE-TENSIONER CIRCUIT IS OPEN
B1134:00-09 - FRONT LH SIDE AIR BAG MODULE CIRCUIT IS OPEN
B1150:00-09 - LH SIDE CURTAIN AIR BAG MODULE CIRCUIT IS OPEN
B1065:00-09 - FRONT PASSENGER AIR BAG MODULE CIRCUIT (AS1) IS OPEN
B1070:00-09 - FRONT PASSENGER AIR BAG MODULE CIRCUIT (AS2) IS OPEN
B1129:00-09 - FRONT RH SIDE AIR BAG MODULE CIRCUIT IS OPEN
B1145:00-09 - RH SIDE CURTAIN AIR BAG MODULE CIRCUIT IS OPEN
B1022:00-09 - COMMUNICATION BETWEEN OCCUPANT CLASSIFICATION SYSTEM

[Rookie2018]

was there a swap on any door or is the passanger seat from another car?

[greencamp]

Lamp is on permanent or blinking?

[dkal_3]

was there a swap on any door or is the passanger seat from another car?

Hi, Thanks I don't know, I going to ask the customer.

[dkal_3]

Lamp is on permanent or blinking?

The lamp is blinking,

[greencamp]

Module in service mode.

[greencamp]

Link

[dkal_3]

Link

Thank you so much, I'll try that.

[Carlos Mejicanos]

Work?