2021 Nissan Kicks 988205RL0B works on bench perfect

[Alchemist]

Currently has (test) beside it, I just tested it on bench and installed it on car, works perfect. Just need to hook up scanner and clear dtcs after. Couldn't get it to work on car.

Enable 12V on Extended Connector... ok
External power +15.29V
Connect... ok
Enter Password... ok
!!!Warning!!! [Write EEPROM] is disabled on this SRS Module.
Clear Crash... ok
Clear Crash Flags... ok
Clear Errors... ok

Enable 12V on Extended Connector... ok
External power +15.22V
Connecting... ok
Nissan SRS Type 2
Read ECU Delivery Assembly Number...
988205RL0B
Set ServiceMode... ok
Read Errors...
B00D5:12-09 - PASS A/B INDCTR CKT AIR BAG CONTROL UNIT SYSTEM
B00A0:88-09 - OCCUPANT SENS AIR BAG CONTROL UNIT SYSTEM
B0091:88-09 - FRONT SIDE AIR BAG SATELLITE SENSOR LEFT
B0096:88-09 - FRONT SIDE AIR BAG SATELLITE SENSOR RIGHT
B0092:88-09 - C-PILLAR SAT SEN LH SENSOR SYSTEM
B0097:88-09 - C-PILLAR SAT SEN RH SENSOR SYSTEM
B0093:88-09 - DOOR SATEL SENS LH SENSOR SYSTEM
B0098:88-09 - DOOR SATEL SENS RH SENSOR SYSTEM
B0094:88-09 - CRASH ZONE SENS SENSOR SYSTEM
B0001:13-09 - DRIVER AIRBAG MODULE FRONT AIR BAG SYSTEM
B0010:13-09 - ASSIST A/B MODULE FRONT AIR BAG SYSTEM
B0002:13-09 - DRIVER AIRBAG MODULE 2 FRONT AIR BAG SYSTEM
B0011:13-09 - ASSIST A/B MODULE 2 FRONT AIR BAG SYSTEM
B1436:13-09 - Unknown Error
B1430:13-09 - PRE-TEN FRONT LH FRONT AIR BAG SYSTEM
B1431:13-09 - PRE-TEN FRONT RH FRONT AIR BAG SYSTEM
B1429:13-08 - BUCKLE SW RH CIRCUIT AIR BAG CONTROL UNIT SYSTEM
B1432:13-08 - PRE-TEN FRONT LH 2 FRONT AIR BAG SYSTEM
B1433:13-08 - PRE-TEN FRONT RH 2 FRONT AIR BAG SYSTEM
B0021:13-08 - CURTAIN A/B MODULE LH SIDE AIR BAG SYSTEM
B0029:13-08 - CURTAIN A/B MODULE RH SIDE AIR BAG SYSTEM
B1434:13-08 - Unknown Error
B0020:13-08 - SIDE A/B MODULE LH SIDE AIR BAG SYSTEM
B0028:13-08 - SIDE A/B MODULE RH SIDE AIR BAG SYSTEM

Enable 12V on Extended Connector... ok
External power +15.14V
Set ServiceMode... ok
Clearing errors... ok

[DuttyFlex]

Hold on a second .. I tested these module before and it cannot write to eeprom.. Read eeprom obd only on car and on bench... how can it clear crash if it cant write to eeprom obd?

[Alchemist]

Hold on a second .. I tested these module before and it cannot write to eeprom.. Read eeprom obd only on car and on bench... how can it clear crash if it cant write to eeprom obd?

guessing they're using a different method to clear the crash data.

External power +15.29V
Connect... ok
Enter Password... ok
!!!Warning!!! [Write EEPROM] is disabled on this SRS Module.
Clear Crash... ok
Clear Crash Flags... ok
Clear Errors... ok

[DuttyFlex]

I had a nissan kick 2021 just yesterday but I didn't test it back.. I know before it failed... you sure module had crash inside it before?

[Alchemist]

I had a nissan kick 2021 just yesterday but I didn't test it back.. I know before it failed... you sure module had crash inside it before?

Yes crash data code was read first using scanner. Removed module from car, and did it on bench.

[DuttyFlex]

Today I tried same exact type module using 988205RL0B and failed.

module is Infinity QX80 2020 98820 6JR0A , eeprom 95128

Processing... 01.12.2021 17.39.33
Checking New Version... ok
Connection to server... ok
Checking security... ok
External power +0.3063V
External power too low
Start Manual Mode for 98820 5RL0A (test)
Enable 12V on Extended Connector... ok
External power +11.93V
Connect... ok
Enter Password... ok
!!!Warning!!! [Write EEPROM] is disabled on this SRS Module.
Clear Crash... failed



Module fit all these too
INFINITI QX56 5.6L V8 AT 2WD LE/HIGH 3ROW 2020
INFINITI QX56 5.6L V8 AT 2WD PREMIUM 3ROW 2020
INFINITI QX56 5.6L V8 AT AWD LE/HIGH 3ROW 2020
INFINITI QX56 5.6L V8 AT AWD PREMIUM 3ROW 2020
INFINITI QX80 5.6L V8 AT 2WD LE/HIGH 3ROW 2020
INFINITI QX80 5.6L V8 AT 2WD PREMIUM 3ROW 2020
INFINITI QX80 5.6L V8 AT AWD LE/HIGH 3ROW 2020
INFINITI QX80 5.6L V8 AT AWD PREMIUM 3ROW 2020

if you check my logs tool list module...read eeprom obd ok...cant write

[smart-prog]

Today I tried same exact type module using 988205RL0B and failed.

module is Infinity QX80 2020 98820 6JR0A , eeprom 95128

Processing... 01.12.2021 17.39.33
Checking New Version... ok
Connection to server... ok
Checking security... ok
External power +0.3063V
External power too low
Start Manual Mode for 98820 5RL0A (test)
Enable 12V on Extended Connector... ok
External power +11.93V
Connect... ok
Enter Password... ok
!!!Warning!!! [Write EEPROM] is disabled on this SRS Module.
Clear Crash... failed



Module fit all these too
INFINITI QX56 5.6L V8 AT 2WD LE/HIGH 3ROW 2020
INFINITI QX56 5.6L V8 AT 2WD PREMIUM 3ROW 2020
INFINITI QX56 5.6L V8 AT AWD LE/HIGH 3ROW 2020
INFINITI QX56 5.6L V8 AT AWD PREMIUM 3ROW 2020
INFINITI QX80 5.6L V8 AT 2WD LE/HIGH 3ROW 2020
INFINITI QX80 5.6L V8 AT 2WD PREMIUM 3ROW 2020
INFINITI QX80 5.6L V8 AT AWD LE/HIGH 3ROW 2020
INFINITI QX80 5.6L V8 AT AWD PREMIUM 3ROW 2020

if you check my logs tool list module...read eeprom obd ok...cant write

You must wait ... now make Update for fixed this problem!
Now you must make clear crash via eeprom!

[DuttyFlex]

I already program eeprom direct and fix yesterday... Thank you for the update..