Ford B-Max AV1T-14B321-CF Wont Clear

[HarryBeans]

Hi

I have a Ford B-Max AV1T-14B321-CF that wont clear diagnostically. Any idea why?

I know this ECU has a fault and I want to clear it before I readout Bank 0 and Bank 1 to clone the ECU.

--------------------------------------------------------
Start Automatic Mode AV1T-14B321-CF
--------------------------------------------------------
DC power supply voltage +12.54V
Turn on 12V on the adapter... ok
Connect... ok
Read Part Number... AV1T-14B321-CF
Read SW Number... AV1T-14C028-AE
Read Calibration Number... failed
Read HW Number... AV1T-14F136-CC
Read Serial Number... N147tI72891
Read Original VIN... WF0KXXERJKDR70210
Read Current VIN... WF0KXXERJKDR70210
Read Errors...
B1202:13-8B - FUEL SENDER CIRCUIT OPEN (Circuit Open)
B0001:13-8B - DRIVER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0010:13-8B - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B007E:13-8B - DRIVER SEATBELT PRETENSIONER "C" DEPLOYMENT CONTROL (Circuit Open)
B007F:13-8B - PASSENGER SEATBELT PRETENSIONER "C" DEPLOYMENT CONTROL (Circuit Open)
B0004:13-8B - DRIVER KNEE BOLSTER DEPLOYMENT CONTROL (Circuit Open)
B0070:13-8B - DRIVER SEATBELT PRETENSIONER DEPLOYMENT CONTROL (Circuit Open)
B1405:13-8B - DRIVER POWER WINDOW DOWN CIRCUIT SHORT TO BATTERY (Circuit Open)
B1408:13-8B - DRIVER POWER WINDOW UP CIRCUIT SHORT TO BATTERY (Circuit Open)
B1404:13-8B - DRIVER POWER WINDOW DOWN CIRCUIT OPEN (Circuit Open)
B1407:13-8B - DRIVER POWER WINDOW UP CIRCUIT OPEN (Circuit Open)
U0155:00-8B - LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER (IC) CONTROL MODULE
U0100:00-8B - LOST COMMUNICATION WITH ECM/PCM
B00DF:13-8B - PASSENGER RESTRAINTS DISABLE SWITCH (Circuit Open)
B11D8:14-0B - RESTRAINT EVENT NOTIFICATION (Circuit Short To Ground or Open)
B1413:93-8B - DRIVER POWER WINDOW MOTOR CIRCUIT SHORT TO GROUND (No Operation)
B1419:93-8B - PASSENGER POWER WINDOW MOTOR CIRCUIT OPEN (No Operation)
B1414:93-8B - POWER WINDOW LR MOTOR CIRCUIT FAILURE (No Operation)
B1415:93-8B - POWER WINDOW LR MOTOR CIRCUIT OPEN (No Operation)
B1418:93-8B - PASSENGER POWER WINDOW MOTOR CIRCUIT FAILURE (No Operation)

--------------------------------------------------------
DC power supply voltage +12.55V
Turn on 12V on the adapter... ok
Read ECU Delivery Assembly Number... AV1T-14B321-CF
Set ServiceMode... ok
Get ServiceMode... 1
Set ServiceMode... ok
Get ServiceMode... 2
Enter security... ok
Set Bootloader Addr... ok
Load Bootloader... ok
Enter Bootloader... ok
Get CRC... 10AC
Set Read Addr... ok
Creating backup "Ford AV1T-14B321-CF XC2361A 12.03.2025 16.10.00.bin" ok
Reading EEPROM... ok
File CRC ok

--------------------------------------------------------
Clearing Crash from Dump File... failed

Thanks

[ABT2015]

It failed because there is no crash data stored

[HarryBeans]

OK, thanks