2017 Dodge Ram 68303218AA

[PJC]

CAR BRAND NAME: DODGE
MODEL: RAM 1500 SLT
PART NUMBER: 68303218AA
CPU / EEPROM: 95256

Hi, I've this module no crash record but in the car show codes for all sensors. Help me out if the file it's bad or it's the module. Thank you in advance.


Processing... 22.11.2024 17.57.06
Checking new version... ok
Connection to server... ok
Checking security... ok
External power +13.23V
Start Manual Mode.
Dodge Bosch 68303218AA 95256
--------------------------------------------------------
DC power supply voltage +13.23V
Turn on 12V on the adapter... ok
Enter Diagnostic Session... ok
Read Part Number... 68303218AA
Read Manufacture Part Number... 0285013489
Read Serial Number... T52MD141702127170
Read VIN... 1C6RR7GG6HS797855
Read Errors...
B0010:13-89 - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0002:13-89 - DRIVER FRONTAL STAGE 2 DEPLOYMENT CONTROL (Circuit Open)
B212D:13-89 - IGNITION RUN ONLY INPUT CIRCUIT OPEN (Circuit Open)
B0001:13-89 - DRIVER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B2768:87-89 - RIGHT IMPACT PRESSURE SENSOR (Missing messages)
B2767:87-89 - LEFT IMPACT PRESSURE SENSOR (Missing messages)
B2764:87-89 - RIGHT B-PILLAR IMPACT ACCELERATION SENSOR (Missing messages)
B2765:87-89 - RIGHT C-PILLAR IMPACT ACCELERATION SENSOR (Missing messages)
B2761:87-89 - LEFT B-PILLAR IMPACT ACCELERATION SENSOR (Missing messages)
B2762:87-89 - LEFT C-PILLAR IMPACT ACCELERATION SENSOR (Missing messages)
B0095:87-89 - RIGHT FRONTAL RESTRAINTS SENSOR (Missing messages)
B0090:87-89 - LEFT FRONTAL RESTRAINTS SENSOR (Missing messages)
B2734:13-09 - PASSENGER OCCUPANT DETECTION SENSOR (Circuit Open)
B0052:13-89 - PASSENGER SEATBELT SENSOR (Circuit Open)
B0050:13-89 - DRIVER SEATBELT SENSOR (Circuit Open)

[AST_Support]

Check all pins in the SRS ECU before connecting to the vehicle and all sensor connecting wires.
Perform vehicle diagnostics and post error codes.

[PJC]

Check all pins in the SRS ECU before connecting to the vehicle and all sensor connecting wires.
Perform vehicle diagnostics and post error codes.

Hi, I check all the wires they are ok, measure resistance with the airbag and show 2.4 to 2.9 ohm. All in the car are OK. I attach the file I write to the module and a screenshot of the scanner the ECU don't read the ohm of the airbag in live data.
I write the module again but I got left with this codes:

DC power supply voltage +13.14V
Turn on 12V on the adapter... ok
Enter Diagnostic Session... ok
Read Part Number... 68303218AA
Read Manufacture Part Number... 0285013489
Read Serial Number... T52MD141702127170
Read VIN... 1C6RR7GG6HS797855
Read Errors...
B0010:13-89 - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0002:13-89 - DRIVER FRONTAL STAGE 2 DEPLOYMENT CONTROL (Circuit Open)
B212D:13-89 - IGNITION RUN ONLY INPUT CIRCUIT OPEN (Circuit Open)
B0001:13-89 - DRIVER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0050:13-89 - DRIVER SEATBELT SENSOR (Circuit Open)

[AST_Support]

This is just a common error after impact on car. You can write the original file and everything will be the same.
You should fix driver and passenger airbags.
To check wires, you can short one of them and the status should change from (Circuit Open) to (Circuit Resistance Below Threshold).

[PJC]

This is just a common error after impact on car. You can write the original file and everything will be the same.
You should fix driver and passenger airbags.
To check wires, you can short one of them and the status should change from (Circuit Open) to (Circuit Resistance Below Threshold).

Ok, I check the resistance from the ecu harness and show 2.9ohm for the driver airbag and 2.4ohm for the passenger airbag.