Announcement

Collapse

New topic template

Every new topic with dump file MUST contain those paragraphs
CAR BRAND NAME:
MODEL:
PART NUMBER:
CPU / EEPROM:
+ at least 4 pictures: of case with sticker, both sides of PCB and zoomed CPU (do NOT resize pictures!)
Subject should looks like "CAR BRAND, MODEL, YEAR, PART NUMBER" (for example: "Mazda 3 2015 BHS2-57K30A")
See more
See less

5q0959655cb

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    5q0959655cb

    volkswagen 2023
    i try to do by bench didn't work

    VW Continental 5Q0959655CB (on bench) 95128
    --------------------------------------------------------
    DC power supply voltage +12.11V
    Turn on 12V on the adapter... ok
    Set Service Mode... ok
    Read SRS Part Number... 5Q0959655CB
    Read Long Coding... 000000000000000000000000000000000000

    Crash Counters...
    Frontal collision - 0
    Driver side collision - 0
    Passanger side collision - 0
    Rear collision - 0
    Rollover Detection - 0
    Active Head Restraint (AHR) System Deployed - failed
    Pedestrian Protection Deployed - 0
    Crash Event Status - 0
    Read Errors...
    B1000:1B-81 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100D:1B-81 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
    B1002:1B-81 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
    B1003:1B-81 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
    B100B:1B-81 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100A:1B-81 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1006:1B-81 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1007:1B-81 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1005:1B-81 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1004:1B-81 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100C:1B-81 - DRIVER SIDE KNEE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100E:1B-81 - FRONT PASSENGER’S KNEE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1011:1B-81 - REAR DRIVER SIDE SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1010:1B-81 - REAR PASSENGER SIDE SIDE-AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1009:1B-81 - DRIVER SIDE REAR SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1008:1B-81 - PASSENGER SIDE REAR SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B100F:1B-81 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
    B1015:1B-81 - IGNITER FOR BATTERY INTERRUPT (Circuit Resistance Above Threshold)
    B1013:1B-81 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
    B1014:1B-81 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
    B201F:00-89 - Unknown Error
    B101E:15-81 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
    B101F:15-81 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
    B2013:00-89 - Unknown Error
    B12F1:14-81 - Unknown Error (Circuit Short To Ground or Open)
    B2005:00-89 - Unknown Error

    --------------------------------------------------------
    DC power supply voltage +12.14V
    Turn on 12V on the adapter... ok
    Set ServiceMode 4F...ok
    Enter Password 03... ok
    Connect... ok
    Synchronization... ok
    Get Seed... ok
    Enter Password... ok
    Start Communication... ok
    Clear Crash... ok
    !!! For clearing counters You need to clear crash data by dump via AST!!!

    --------------------------------------------------------
    DC power supply voltage +12.13V
    Turn on 12V on the adapter... ok
    Set ServiceMode... ok
    Clear errors... ok

    --------------------------------------------------------
    DC power supply voltage +12.14V
    Turn on 12V on the adapter... ok
    Set Service Mode... ok
    Read SRS Part Number... 5Q0959655CB
    Read Long Coding... 000000000000000000000000000000000000

    Crash Counters...
    Frontal collision - 0
    Driver side collision - 0
    Passanger side collision - 0
    Rear collision - 0
    Rollover Detection - 0
    Active Head Restraint (AHR) System Deployed - failed
    Pedestrian Protection Deployed - 0
    Crash Event Status - 0
    Read Errors...
    B1000:1B-81 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100D:1B-81 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
    B1002:1B-81 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
    B1003:1B-81 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
    B100B:1B-81 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100A:1B-81 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1006:1B-81 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1007:1B-81 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1005:1B-81 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1004:1B-81 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100C:1B-81 - DRIVER SIDE KNEE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B100E:1B-81 - FRONT PASSENGER’S KNEE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1011:1B-81 - REAR DRIVER SIDE SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1010:1B-81 - REAR PASSENGER SIDE SIDE-AIRBAG IGNITER (Circuit Resistance Above Threshold)
    B1009:1B-81 - DRIVER SIDE REAR SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B1008:1B-81 - PASSENGER SIDE REAR SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
    B100F:1B-81 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
    B1015:1B-81 - IGNITER FOR BATTERY INTERRUPT (Circuit Resistance Above Threshold)
    B1013:1B-81 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
    B1014:1B-81 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
    B201F:00-89 - Unknown Error
    B101E:15-81 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
    B101F:15-81 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
    B2013:00-89 - Unknown Error
    B12F1:14-81 - Unknown Error (Circuit Short To Ground or Open)
    B2005:00-89 - Unknown Error



    Attached Files
    Tags: None
  • #2
    This is a new SRS ECU without coding or not cleaned well before with other software.

    Comment

    • #3
      yes you right that was new module .

      but tis one old module can you check if this one good now

      VW Continental 5Q0959655CB (on bench) 95128
      --------------------------------------------------------
      DC power supply voltage +12.1V
      Turn on 12V on the adapter... ok
      Set Service Mode... ok
      Read SRS Part Number... 5Q0959655CB
      Read Long Coding... 8CCCFC00000000005000001AC24800000065

      Crash Counters...
      Frontal collision - 0
      Driver side collision - 1
      Passanger side collision - 0
      Rear collision - 0
      Rollover Detection - 0
      Active Head Restraint (AHR) System Deployed - failed
      Pedestrian Protection Deployed - 0
      Crash Event Status - 0
      Read Errors...
      B100D:1A-88 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Below Threshold)
      B100F:1A-88 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Below Threshold)
      B1000:1B-89 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100D:1B-89 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
      B1002:1B-89 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
      B1003:1B-89 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
      B100B:1B-89 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100A:1B-89 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B1006:1B-89 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
      B1007:1B-89 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
      B1005:1B-89 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B1004:1B-89 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100F:1B-89 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
      B1013:1B-89 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
      B1014:1B-89 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
      B1018:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON DRIVER SIDE) (Circuit short to battery or open)
      B1017:15-89 - DRIVER’S SIDE AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B1019:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON FRONT PASSENGER SIDE) (Circuit short to battery or open)
      B1036:15-89 - CRASH SENSOR SIDE AIRBAG PASSENGER SIDE (Circuit short to battery or open)
      B101A:15-89 - DRIVER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B101B:15-89 - FRONT PASSENGER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B101E:15-89 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
      B101F:15-89 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
      B1016:14-89 - FRONT PASSENGER’S AIRBAG DISABLED INDICATOR LAMP (Circuit Short To Ground or Open)
      B1022:31-89 - SEAT OCCUPIED RECOGNITION CONTROL MODULE (No Signal)
      B102A:00-89 - !!! DRIVER SIDE CRASH DATA STORED !!!

      --------------------------------------------------------
      DC power supply voltage +12.12V
      Turn on 12V on the adapter... ok
      Set ServiceMode 4F...ok
      Enter Password 03... ok
      Connect... ok
      Synchronization... ok
      Get Seed... ok
      Enter Password... ok
      Start Communication... ok
      Clear Crash... ok
      !!! For clearing counters You need to clear crash data by dump via AST!!!

      --------------------------------------------------------
      DC power supply voltage +12.12V
      Turn on 12V on the adapter... ok
      Set ServiceMode... ok
      Clear errors... ok

      --------------------------------------------------------
      DC power supply voltage +12.13V
      Turn on 12V on the adapter... ok
      Set Service Mode... ok
      Read SRS Part Number... 5Q0959655CB
      Read Long Coding... 8CCCFC00000000005000001AC24800000065

      Crash Counters...
      Frontal collision - 0
      Driver side collision - 1
      Passanger side collision - 0
      Rear collision - 0
      Rollover Detection - 0
      Active Head Restraint (AHR) System Deployed - failed
      Pedestrian Protection Deployed - 0
      Crash Event Status - 0
      Read Errors...
      B1000:1B-89 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100D:1B-89 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
      B1002:1B-89 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
      B1003:1B-89 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
      B100B:1B-89 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100A:1B-89 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B1006:1B-89 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
      B1007:1B-89 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
      B1005:1B-89 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B1004:1B-89 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
      B100F:1B-89 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
      B1013:1B-89 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
      B1014:1B-89 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
      B1018:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON DRIVER SIDE) (Circuit short to battery or open)
      B1017:15-89 - DRIVER’S SIDE AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B1019:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON FRONT PASSENGER SIDE) (Circuit short to battery or open)
      B1036:15-89 - CRASH SENSOR SIDE AIRBAG PASSENGER SIDE (Circuit short to battery or open)
      B101A:15-89 - DRIVER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B101B:15-89 - FRONT PASSENGER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
      B101E:15-89 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
      B101F:15-89 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
      B1016:14-89 - FRONT PASSENGER’S AIRBAG DISABLED INDICATOR LAMP (Circuit Short To Ground or Open)
      B1022:31-89 - SEAT OCCUPIED RECOGNITION CONTROL MODULE (No Signal)
      U0002:00-09 - POWERTRAIN DATABUS NO COMMUNICATIONS

      Comment

      • #4
        For Clear Crash counter use AST (read eeprom 95128)

        !!! For clearing counters You need to clear crash data by dump via AST!!!
        http://smart-prog.com/

        Comment

        • #5
          i will try in the car today and i will back with result

          VW Continental 5Q0959655CB (on bench) 95128
          --------------------------------------------------------
          DC power supply voltage +12.1V
          Turn on 12V on the adapter... ok
          Set Service Mode... ok
          Read SRS Part Number... 5Q0959655CB
          Read Long Coding... 8CCCFC00000000005000001AC24800000065

          Crash Counters...
          Frontal collision - 0
          Driver side collision - 0
          Passanger side collision - 0
          Rear collision - 0
          Rollover Detection - 0
          Active Head Restraint (AHR) System Deployed - failed
          Pedestrian Protection Deployed - 0
          Crash Event Status - 0
          Read Errors...
          B1000:1B-89 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
          B100D:1B-89 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
          B1002:1B-89 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
          B1003:1B-89 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
          B100B:1B-89 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
          B100A:1B-89 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
          B1006:1B-89 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
          B1007:1B-89 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
          B1005:1B-89 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
          B1004:1B-89 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
          B100F:1B-89 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
          B1013:1B-89 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
          B1014:1B-89 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
          B1018:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON DRIVER SIDE) (Circuit short to battery or open)
          B1017:15-89 - DRIVER’S SIDE AIRBAG CRASH SENSOR (Circuit short to battery or open)
          B1019:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON FRONT PASSENGER SIDE) (Circuit short to battery or open)
          B1036:15-89 - CRASH SENSOR SIDE AIRBAG PASSENGER SIDE (Circuit short to battery or open)
          B101A:15-89 - DRIVER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
          B101B:15-89 - FRONT PASSENGER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
          B101E:15-89 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
          B101F:15-89 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
          B1016:14-89 - FRONT PASSENGER’S AIRBAG DISABLED INDICATOR LAMP (Circuit Short To Ground or Open)
          B1022:31-89 - SEAT OCCUPIED RECOGNITION CONTROL MODULE (No Signal)
          U0002:00-09 - POWERTRAIN DATABUS NO COMMUNICATIONS

          --------------------------------------------------------
          DC power supply voltage +12.15V
          Turn on 12V on the adapter... ok
          Set ServiceMode... ok
          Clear errors... ok



          Comment

          • #6
            back with the result its good

            Comment

            Previous template Next

            We are open for you

            Collapse

            Mon - Fri
            10 AM - 6 PM

            Current time is:

            Latest Activity

            Collapse
            View All
            Working...
            X

            We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

            By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

            I Agree