toyota highlander 2009

[AST_Support]

Try Atmel AT93C66B and ST M93C66

[kassemBK]

check plz

[kassemBK]

can you check this fil i read from Autel maxilm im608

[AST_Support]

Atmel AT93C66B and Autel read is good.
Write this file, pass PM.

[kassemBK]

write done i will check today the car in my time after 10 h and i will let you know the result thank you

[kassemBK]

hi install the module back to the car and airbag light still there i scan it with AUTEL and give me this code can you tell me what i should do
thank you

[AST_Support]

Always, if possible, test the SRS connections on the bench after performing a Clear Crash.

[kassemBK]

Toyota Highlander 89170-48250 (diag only)
--------------------------------------------------------
Enable 12V on Extended Connector... ok
External power +11.16V
Connecting by CAN...
Read Part Number...
Connecting by KLine...
Start Communication... ok
Read Part Number... 89170-48250
Read Crash Status... Crash Not Found
Read Errors...
B1000 - CENTER AIRBAG SENSOR ASSEMBLY MALFUNCTION
B1603 - FRONT SATELLITE SENSOR BUS RH INITIALIZATION INCOMPLETE
B1608 - FRONT SATELLITE SENSOR BUS LH INITIALIZATION INCOMPLETE
B1643 - DRIVER SIDE SATELLITE SENSOR BUS INITIALIZATION INCOMPLETE
B1648 - FRONT PASSENGER SIDE SATELLITE SENSOR BUS INITIALIZATION INCOMPLETE
B1650 - OCCUPANT CLASSIFICATION SYSTEM MALFUNCTION
B1653 - SEAT POSITION AIRBAG SENSOR CIRCUIT MALFUNCTION
B1655 - DRIVER SIDE SEAT BELT BUCKLE SWITCH CIRCUIT MALFUNCTION
B1660 - PASSENGER AIRBAG ON/OFF INDICATOR CIRCUIT MALFUNCTION
B1801 - OPEN IN DRIVER SIDE SQUIB CIRCUIT
B1806 - OPEN IN FRONT PASSENGER SIDE SQUIB CIRCUIT
B1811 - OPEN IN DRIVER SIDE SQUIB 2ND STEP CIRCUIT
B1816 - OPEN IN FRONT PASSENGER SIDE SQUIB 2ND STEP CIRCUIT
B1821 - OPEN IN FRONT DRIVER SIDE - SIDE SQUIB CIRCUIT
B1826 - OPEN IN FRONT PASSENGER SIDE - SIDE SQUIB CIRCUIT
B1831 - OPEN IN DRIVER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1836 - OPEN IN FRONT PASSENGER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1861 - OPEN IN DRIVER SIDE KNEE AIRBAG SQUIB CIRCUIT
B1901 - OPEN IN FRONT DRIVER SIDE PRETENSIONER SQUIB CIRCUIT
Stop Communication... ok

[AST_Support]

If you tried to read IC8 as EEPROM, it may be damaged. Check the soldering.
SRS ECU should not have B1000 - CENTER AIRBAG SENSOR ASSEMBLY MALFUNCTION on the bench.
If you fix everything, you should click Clear Errors first and then Connect and Read Errors.

[kassemBK]

Toyota Highlander 89170-48250 (diag only)
--------------------------------------------------------
Enable 12V on Extended Connector... ok
External power +11.13V
Connecting by CAN...
Read Part Number...
Connecting by KLine...
Start Communication... ok
Read Part Number... 89170-48250
Clear Errors... ok
Stop Communication... ok

--------------------------------------------------------
Enable 12V on Extended Connector... ok
External power +11.15V
Connecting by CAN...
Read Part Number...
Connecting by KLine...
Start Communication... ok
Read Part Number... 89170-48250
Read Crash Status... Crash Not Found
Read Errors...
B1603 - FRONT SATELLITE SENSOR BUS RH INITIALIZATION INCOMPLETE
B1608 - FRONT SATELLITE SENSOR BUS LH INITIALIZATION INCOMPLETE
B1643 - DRIVER SIDE SATELLITE SENSOR BUS INITIALIZATION INCOMPLETE
B1648 - FRONT PASSENGER SIDE SATELLITE SENSOR BUS INITIALIZATION INCOMPLETE
B1650 - OCCUPANT CLASSIFICATION SYSTEM MALFUNCTION
B1653 - SEAT POSITION AIRBAG SENSOR CIRCUIT MALFUNCTION
B1655 - DRIVER SIDE SEAT BELT BUCKLE SWITCH CIRCUIT MALFUNCTION
B1660 - PASSENGER AIRBAG ON/OFF INDICATOR CIRCUIT MALFUNCTION
B1801 - OPEN IN DRIVER SIDE SQUIB CIRCUIT
B1806 - OPEN IN FRONT PASSENGER SIDE SQUIB CIRCUIT
B1811 - OPEN IN DRIVER SIDE SQUIB 2ND STEP CIRCUIT
B1816 - OPEN IN FRONT PASSENGER SIDE SQUIB 2ND STEP CIRCUIT
B1821 - OPEN IN FRONT DRIVER SIDE - SIDE SQUIB CIRCUIT
B1826 - OPEN IN FRONT PASSENGER SIDE - SIDE SQUIB CIRCUIT
B1831 - OPEN IN DRIVER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1836 - OPEN IN FRONT PASSENGER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1861 - OPEN IN DRIVER SIDE KNEE AIRBAG SQUIB CIRCUIT
B1901 - OPEN IN FRONT DRIVER SIDE PRETENSIONER SQUIB CIRCUIT
Stop Communication... ok

[AST_Support]

Everything seems to be fine on the bench, but the problems with IC8 could remain.

[kassemBK]

What i should do

[AST_Support]

Check the soldering and placement of IC8, and if these communication errors remain, replace this IC with a new one.