Subaru 98221CA060 no h8sx flash in databse

[TR808]

need Subaru 98221CA060 flash for CPT

[AST_Support]

You can use ASTCAN to clear crash in this module

[TR808]

You can use ASTCAN to clear crash in this module

it doesnt work



Subaru 98221CA060 (on bench with RES10K)
1. Connect and Read DTC
2. Read Flash
3. Erase Flash (Crash)
4. Write Flash (Hardware modification required)
5. Clear Errors
Opened file: C:\SRS ECU\98221ca060.bin
Enable 12V on Extended Connector... ok
External power +13.31V
Set ServiceMode... failed
No answer from AirBag, check Airbag connection and power supply
Enable 12V on Extended Connector... ok
External power +13.22V
Set ServiceMode... ok
Read ECU Serial Number...
89170-CA060
Read Errors...
B11F6 - Unknown Error
B1822 - SHORT TO GND IN FRONT DRIVER SIDE - SIDE SQUIB CIRCUIT
B1831 - OPEN IN DRIVER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1821 - OPEN IN FRONT DRIVER SIDE - SIDE SQUIB CIRCUIT
B1693 - DOOR SIDE AIRBAG SENSOR RH INITIALIZATION INCOMPLETE
B1801 - OPEN IN DRIVER SIDE SQUIB CIRCUIT
B1806 - OPEN IN FRONT PASSENGER SIDE SQUIB CIRCUIT
B1901 - OPEN IN FRONT DRIVER SIDE PRETENSIONER SQUIB CIRCUIT
B1906 - OPEN IN FRONT PASSENGER SIDE PRETENSIONER SQUIB CIRCUIT
B1826 - OPEN IN FRONT PASSENGER SIDE - SIDE SQUIB CIRCUIT
B1836 - OPEN IN FRONT PASSENGER SIDE CURTAIN SHIELD SQUIB CIRCUIT
B1618 - FRONT AIRBAG SENSOR LH INITIALIZATION INCOMPLETE
B1679 - REAR FLOOR AIRBAG SENSOR LH INITIALIZATION INCOMPLETE
B1623 - DRIVER SIDE - SIDE AIRBAG SENSOR ASSEMBLY INITIALIZATION INCOMPLETE
B1628 - FRONT PASSENGER SIDE - SIDE AIRBAG SENSOR ASSEMBLY INITIALIZATION INCOMPLETE
B1000 - CENTER AIRBAG SENSOR ASSEMBLY MALFUNCTION

Enable 12V on Extended Connector... ok
External power +13.21V
Set ServiceMode... ok
Enter security... ok
Erase Flash... ok

Enable 12V on Extended Connector... ok
External power +13.26V
Set ServiceMode... failed
No answer from AirBag, check Airbag connection and power supply
Enable 12V on Extended Connector... ok
External power +13.15V
Set ServiceMode... failed
No answer from AirBag, check Airbag connection and power supply
Enable 12V on Extended Connector... ok
External power +13.21V
Set ServiceMode... failed
No answer from AirBag, check Airbag connection and power supply

[AST_Support]

When you press DoIt button there is step by step instruction how to do it.

[TR808]

When you press DoIt button there is step by step instruction how to do it.

yes I followed those instructions very carefully step by step. But still getting “no answer from airbag” when I try to write flash

[AST_Support]

You have finished writing flash on this ECU and I think now everything is fine.

[TR808]

good news, one of my employees was able to write flash successfully yesterday

[kirya-d]

AST can't clear crash in H8Sx it seems.
In Honda same problems

[TR808]

AST can't clear crash in H8Sx it seems.
In Honda same problems

yes. I use different programmer for H8SX

[smart-prog]

AST can't clear crash in H8Sx it seems.
In Honda same problems

For Honda use CPT uart H8SX.... HONDA not same SUBARU

[LockBit]

need Subaru 98221CA060 flash for CPT

The cleared file has been added to the CPT download area.

[TR808]

Good. Thank you. I’m glad the flash file I read was used for this

[kirya-d]

For Honda use CPT uart H8SX.... HONDA not same SUBARU

I know. But problem are same.

[smart-prog]

I know. But problem are same.

WHAT SAME! Different solution!