Need help

[readyforairbag]

CAR BRAND NAME: VW
MODEL: JEETA
YEAR:2025
PART NUMBER: 5Q0 959 655 CB
CPU: 10423 + 95128

DC power supply voltage +12.47V
Turn on 12V on the adapter... ok
Set Service Mode... ok
Read SRS Part Number... 5Q0959655CB
Read Long Coding... 8CCCFC00000000005000001AC24800000065

Crash Counters...
Frontal collision - 127
Driver side collision - 13
Passanger side collision - 128
Rear collision - 127
Rollover Detection - 0
Active Head Restraint (AHR) System Deployed - failed
Pedestrian Protection Deployed - 127
Number of Rollover Bar Deployments - 127
Read Errors...
B1000:1B-89 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100D:1B-89 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
B1002:1B-89 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
B1003:1B-89 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
B100B:1B-89 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100A:1B-89 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
B1006:1B-89 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
B1007:1B-89 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
B1005:1B-89 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
B1004:1B-89 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100F:1B-89 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
B1013:1B-89 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
B1014:1B-89 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
B1018:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON DRIVER SIDE) (Circuit short to battery or open)
B1017:15-89 - DRIVER’S SIDE AIRBAG CRASH SENSOR (Circuit short to battery or open)
B1019:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON FRONT PASSENGER SIDE) (Circuit short to battery or open)
B1036:15-89 - CRASH SENSOR SIDE AIRBAG PASSENGER SIDE (Circuit short to battery or open)
B101A:15-89 - DRIVER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
B101B:15-89 - FRONT PASSENGER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
B101E:15-89 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
B101F:15-89 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
B10B6:00-89 - Unknown Error
B1016:14-89 - FRONT PASSENGER’S AIRBAG DISABLED INDICATOR LAMP (Circuit Short To Ground or Open)
B1022:31-89 - SEAT OCCUPIED RECOGNITION CONTROL MODULE (No Signal)
U0002:00-09 - POWERTRAIN DATABUS NO COMMUNICATIONS

[AST_Support]

The data is corrupted. Do you have the original file?

[readyforairbag]

no i dont have

[AST_Support]

Try this file, password in PM.

[readyforairbag]

i write this file still with the same error, should I need to read the MUC

[AST_Support]

Read and post data from EEPROM after connection.

[readyforairbag]

Here it is

[AST_Support]

The data is corrupted by the MCU.
Read and post all data banks.

[readyforairbag]

Here it is

[smart-prog]

Read Upl Please...

Read and post all data banks.

[readyforairbag]

Here it is

[AST_Support]

Write this DataFlash file and previously good EEPROM, and only then run on-bench diagnostics.

[readyforairbag]

W Continental 5Q0959655CB (on bench) 95128
--------------------------------------------------------
DC power supply voltage +12.36V
Turn on 12V on the adapter... ok
Set Service Mode... ok
Read SRS Part Number... 5Q0959655CB
Read Long Coding... 8CCCFC00000000005000001FC24800000065

Crash Counters...
Frontal collision - 127
Driver side collision - 13
Passanger side collision - 128
Rear collision - 127
Rollover Detection - 0
Active Head Restraint (AHR) System Deployed - failed
Pedestrian Protection Deployed - 127
Number of Rollover Bar Deployments - 127
Read Errors...
B1000:1B-89 - DRIVER AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100D:1B-89 - DRIVER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
B1002:1B-89 - IGNITER FOR PASSENGER SIDE AIRBAG (Circuit Resistance Above Threshold)
B1003:1B-89 - AIRBAG IGNITER 2 – PASSENGER SIDE (Circuit Resistance Above Threshold)
B100B:1B-89 - DRIVER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100A:1B-89 - FRONT PASSENGER SIDE AIRBAG IGNITER (Circuit Resistance Above Threshold)
B1006:1B-89 - DRIVER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
B1007:1B-89 - PASSENGER SIDE SEAT BELT TENSION IGNITER (Circuit Resistance Above Threshold)
B1005:1B-89 - DRIVER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
B1004:1B-89 - FRONT PASSENGER HEAD AIRBAG IGNITER (Circuit Resistance Above Threshold)
B100F:1B-89 - FRONT PASSENGER’S SAFETY BELT TENSIONER IGNITER 2 (Circuit Resistance Above Threshold)
B1013:1B-89 - DRIVERS BELT FORCE LIMITER IGNITER – RESISTANCE TOO HIGH (Circuit Resistance Above Threshold)
B1014:1B-89 - PASSENGER’S BELT FORCE LIMITER IGNITER (Circuit Resistance Above Threshold)
B1018:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON DRIVER SIDE) (Circuit short to battery or open)
B1017:15-89 - DRIVER’S SIDE AIRBAG CRASH SENSOR (Circuit short to battery or open)
B1019:15-89 - REAR SIDE AIRBAG CRASH SENSOR (ON FRONT PASSENGER SIDE) (Circuit short to battery or open)
B1036:15-89 - CRASH SENSOR SIDE AIRBAG PASSENGER SIDE (Circuit short to battery or open)
B101A:15-89 - DRIVER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
B101B:15-89 - FRONT PASSENGER’S FRONT AIRBAG CRASH SENSOR (Circuit short to battery or open)
B101E:15-89 - DRIVER’S SEAT POSITION SENSOR (Circuit short to battery or open)
B101F:15-89 - PASSENGER’S SEAT POSITION SENSOR (Circuit short to battery or open)
B10B6:00-89 - Unknown Error
B12F1:14-89 - Unknown Error (Circuit Short To Ground or Open)
B1016:14-89 - FRONT PASSENGER’S AIRBAG DISABLED INDICATOR LAMP (Circuit Short To Ground or Open)
B1022:31-89 - SEAT OCCUPIED RECOGNITION CONTROL MODULE (No Signal)
U0002:00-09 - POWERTRAIN DATABUS NO COMMUNICATIONS