68346 712AB, Dodge Ram 1500, 2015-19, 95256

[pertel]

Hello, .... Can you help me to clear this Crash in Airbag Module

P/N: 68346 712AB
Make: Dodge
Model: Ram 1500
Eeprom: 95256

Here are the DTCs, ..... The Smart OBD, cant to clear, .. it show Damp ERROR (I think must be Dump ERROR),
However the Dump is right,... I try to clear with AST5 P/N 68346 715AB, but doesnt work, ....does not eliminate the
B1C7:00-09 "DEPLOYMENT DATA RECORD FULL"

Thanks for your Help,

Dodge RAM Bosch "68346 715AB", 95256, ..
Enable 12V on Extended Connector... ok
External power +12.92V
Enter Diagnostic Session... ok
Read Part Number... 68346712AB
Read Manufacture Part Number... 0285014860
Read Serial Number... T52MD240804361080
Read VIN... 3C6KRBAT3KG501957
Read Errors...
B0028:13-89 - RIGHT SIDE SEAT DEPLOYMENT SQUIB 1
B1BC7:00-89 - !!! DEPLOYMENT DATA RECORD FULL !!!
U1110:00-09 - Unknown Error
B2768:87-89 - RIGHT IMPACT PRESSURE SENSOR
B2767:87-89 - LEFT IMPACT PRESSURE SENSOR
B2764:87-89 - RIGHT B-PILLAR IMPACT ACCELERATION SENSOR
B2761:87-89 - LEFT B-PILLAR IMPACT ACCELERATION SENSOR
B0095:87-89 - RIGHT FRONT ACCELERATION SENSOR
B0090:87-89 - LEFT FRONT ACCELERATION SENSOR
B2734:13-09 - PASSENGER OCCUPANT DETECTION SENSOR
B0052:13-89 - FRONT PASSENGER BUCKLE SWITCH
B0050:13-89 - FRONT DRIVER BUCKLE SWITCH
====================================
Enable 12V on Extended Connector... ok
External power +12.93V
Connect... ok
Enter Password... ok
Creating backup "Dodge 68346712AB 95256 07.10.2023 13.02.04.bin" ok
Reading EEPROM... ok
==============================

Warning!!!
TURN OFF IGNITION OR 12V POWER SUPPLY FROM AIRBAG, WAIT 30 SECONDS AND TURN ON

Saved file: F:\14.- Chrysler\++++++++++68346 712AB\68346 712AB, Dodge Ram 1500 15, 95256, Crash File, 1 .... Readed with Smart tool.bin
Damp ERROR

[smart-prog]

Please test this file!
Password in PM.
Post result here!
P.S.no result no help

[pertel]

Hello Smart-prog
I tested your Clear File 1rst try, ... dont change DTCs, .... remain

B1BC7:00-08 - !!! DEPLOYMENT DATA RECORD FULL !!!

can you try again please, ..... Thanks

========================
here is the Log File with your 1rst Try

Dodge RAM Bosch 68346712AB
Enable 12V on Extended Connector... ok
External power +12.94V
Enter Diagnostic Session... ok
Read Part Number... 68346712AB
Read Manufacture Part Number... 0285014860
Read Serial Number... T52MD240804361080
Read VIN... 3C6KRBAT3KG501957
Read Errors...
B0028:13-89 - RIGHT SIDE SEAT DEPLOYMENT SQUIB 1
B1BC7:00-08 - !!! DEPLOYMENT DATA RECORD FULL !!!
U1110:00-09 - Unknown Error
B2768:87-89 - RIGHT IMPACT PRESSURE SENSOR
B2767:87-89 - LEFT IMPACT PRESSURE SENSOR
B2764:87-89 - RIGHT B-PILLAR IMPACT ACCELERATION SENSOR
B2761:87-89 - LEFT B-PILLAR IMPACT ACCELERATION SENSOR
B0095:87-89 - RIGHT FRONT ACCELERATION SENSOR
B0090:87-89 - LEFT FRONT ACCELERATION SENSOR
B2734:13-09 - PASSENGER OCCUPANT DETECTION SENSOR
B0052:13-89 - FRONT PASSENGER BUCKLE SWITCH
B0050:13-89 - FRONT DRIVER BUCKLE SWITCH

Enable 12V on Extended Connector... ok
External power +12.96V
Connect... ok
Enter Password... ok
Creating backup "Dodge 68346712AB 95256 09.10.2023 08.31.31.bin" ok
Reading EEPROM... ok

Warning!!!
TURN OFF IGNITION OR 12V POWER SUPPLY FROM AIRBAG, WAIT 30 SECONDS AND TURN ON

Clear Crash by dump
Damp ERROR

[pertel]

Hello Smart-prog
I tested your Clear File 1rst try, ... dont change DTCs, .... remain

B1BC7:00-08 - !!! DEPLOYMENT DATA RECORD FULL !!!

can you try again please, ..... Thanks

[AST_Support]

Select model 68490898AA and press Clear Crash by OBD button

[smart-prog]

Please test this file!
Password in PM.
Post result here!
P.S.no result no help

[pertel]

I am waiting bring the car again, .... I will inform later, .... thanks

[pertel]

Hello smart-prog , ............

Your File Works Perfect, ........Thanks

[smart-prog]

Big thanks for Info!