Polo Vivo strugling to find anything on this SRS module

[nick.1207]

Hi I can't find any information on this SRS module, I couldn't find anything on the eeprom or the CPU and it isn't in the airbagservicetool. I need to clear the crash from the module. could you guide me in the right direction please.

[smart-prog]

Read motorola MASK : 0M04Z

[nick.1207]

Hi could you send me a diagram on how to read the Motorola chip I am unfamiliar with it.

[nick.1207]

I cant find any info about this Motorola chip online, do you know of a website I could use to find out which pins are which?

[nick.1207]

if you have any advice I would really appreciate it, I cant figure out how to read the Motorola chip, I cant find pinouts and even if I did I don't know which CPU programmer option to use.

[nick.1207]

Hi has anyone figured out how to read/write on this module or on a similar module? I cant find any information on this.

[smart-prog]

Find programmator for read motorola MASK : 0M04Z

[nick.1207]

do you know which programmer I should buy that can clear VW airbag modules like this one?

[smart-prog]

i Think Orange5 must support this CPU!

[nick.1207]

Hi, I used to be able to program these polo ecus from the pinouts now I cant any advice please

[AST_Support]

There should be no problems with this.
Enter your current AST Card SN in your profile.
Take a picture of your connection.

[nick.1207]

Hi attached is the connection

[AST_Support]

Try connecting another KLine SRS ECU to check if SmartOBD works.
The SRS ECU may be damaged.

[nick.1207]

I have tried 3 different ecus with same part no same problem attached is what it says

[AST_Support]

Tested on the bench the same SRS ECU.
Connecting... ok
Read Part Number... 1C0909605F
Read Errors...
0513:31 - DATA BUS DIAGNOSTIC INTERFACE-J533
024C:20 - DRIVER AIRBAG IGNITER-N95
024D:20 - AIRBAG IGNITER 1 FRONT PASSENGER AIRBAG-N131
04C1:20 - SIDE DRIVER AIRBAG IGNITER-N199

Reboot your PC and try again.