Fiat Panda Mopar TRW 00052043604 95640

[Siman]

Hi
Tried to clear via CANOBD but the customer says still has B0100- internal fault, The OBD pin out also does not work to check the DTC on bench.
so could you please clear this file.
many tthanks

[AST_Support]

Write the original file and use this pinout for on-bench connection.

[Siman]

Thanks for the pinout and now I can see the DTC but still have the internal error. tried clearing by AST, CANOBD and also via ASTCAN, but still the same error, can you please clear the file.

Fiat Panda Mopar TRW 00052043604 95640
--------------------------------------------------------
DC power supply voltage +12.06V
Turn on 12V on the adapter... ok
Enter Diagnostic Session... ok
Read Part Number... 52043604
Read Errors...
U1703:87-8F - Unknown Error (Missing messages)
U1700:87-8F - Unknown Error (Missing messages)
B0112:2F-8F - PASSENGER REMOTE ACCELERATION (SATELLITE) (Signal Erratic)
U0019:87-8E - Unknown Error (Missing messages)
B0111:2F-8F - DRIVER REMOTE ACCELERATION SENSOR (SATELLITE) B PILLAR (Signal Erratic)
B0124:1B-8F - FRONT PASSENGER SILL END PRETENSIONER (Circuit Resistance Above Threshold)
B0123:1B-8F - FRONT DRIVER SILL END PRETENSIONER (Circuit Resistance Above Threshold)
B0102:00-8F - !!! SRS ECU HARDWARE FAULTS !!!
B00D5:14-8F - RESTRAINT SYSTEM PASSENGER DISABLE INDICATOR (Circuit Short To Ground or Open)
B0100:49-8F - !!! SRS ECU INTERNAL ERRORS !!! (Internal electronic failure)

[AST_Support]

Try this good file from another car. Password in PM.