recover codflash NEED CODE FLASH

[readyforairbag]

CAR BRAND NAME: ford
MODEL: escape
YEAR: 2024
PART NUMBER: PJ6T 14B321 AC
CPU: R7F701064

recover codflash ... failed , you need to write good codeflash file.

Connect MCU... ok
Get device type... RH850 standart
Set Oscillator Frequency... 16MHz
Set Baudrate... ok
Read MCU lock status... unlocked
Read password security status... not secured
Read MCU type... R7F701064
CodeFlashSize = 00100000
DataFlashSize = 00008000
UserBootSize = 00008000
Read ICUS Status... Off
Read Option Bytes... FFFF279AFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFF
Get Protection Byte... ok
Read disabled
Write disabled
Erase enabled
Start Sending Loader... !!! LOCKED !!!
Bypassing MCU lock security... ,:,,,,,,,,
Bypassed. ok
Sending Main Loader...ok
Get Seed... ok
Enter Password... ok
Creating backup "Ford PJ6T-14B321-AC R7F701064 OPT 01.11.2025 15.32.00.bin" ok
Set Read Mode... ok
Read Option Bytes... ok
Set Read Mode... ok
Creating backup "Ford PJ6T-14B321-AC R7F701064 CodeFlash 01.11.2025 15.32.01.bin" ok
Read CodeFlash... ok
Creating backup "Ford PJ6T-14B321-AC R7F701064 UserBoot 01.11.2025 15.37.12.bin" ok
Read UserBoot... ok
Creating backup "Ford PJ6T-14B321-AC R7F701064 DataFlash 01.11.2025 15.37.23.bin" ok
Read DataFlash... ok
Unlock Mode... ok
Recover CodeFlash... failed, you need to write good CodeFlash file.
Write OPT... failed write OPT1

[AST_Support]

Why didn't you use the Clear Crash by OBD?

[readyforairbag]

Actually tried a clear crash by OBD once it’s super quick, like just a second.
But sometimes they mess up the configuration, which is why I usually do it the other way.
And now they’re asking about CODE flash instead, so it’s a bit of a mix!

[AST_Support]

Use "R7F701064 CodeFlash" and write your original CodeFlash file.
The same with "R7F701064 OPT".