Honda N Box 77960-TTA-J910-M2 CRASH CLEAR DONE BUT DATA CRASH

[majidali007]

CAR BRAND NAME :HONDA NBOX
MODEL:2022
PART NUMBER:77960-TTA-J910-M2
CPU:R7F7010623
still crash data in module

[AST_Support]

There is no crash data, only normal errors.
Read Assembly Number... 77960-TTA-J910
Read Errors...
B0001:13-CA - DRIVER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0010:13-CA - PASSENGER FRONTAL STAGE 1 DEPLOYMENT CONTROL (Circuit Open)
B0020:13-CA - LEFT SIDE AIRBAG DEPLOYMENT CONTROL (Circuit Open)
B0021:13-CA - LEFT CURTAIN DEPLOYMENT CONTROL 1 (Circuit Open)
B0028:13-CA - RIGHT SIDE AIRBAG DEPLOYMENT CONTROL (Circuit Open)
B0029:13-CA - RIGHT CURTAIN DEPLOYMENT CONTROL 1 (Circuit Open)
B0050:13-8A - DRIVER SEATBELT SENSOR (Circuit Open)
B0070:13-CA - DRIVER SEATBELT PRETENSIONER DEPLOYMENT CONTROL (Circuit Open)
B0072:13-CA - PASSENGER SEATBELT PRETENSIONER „AЃEDEPLOYMENT CONTROL (Circuit Open)
B0090:87-CA - LEFT FRONTAL RESTRAINTS SENSOR (Missing messages)
B0091:87-CA - LEFT SIDE RESTRAINTS SENSOR 1 (Missing messages)
B0095:87-CA - RIGHT FRONTAL RESTRAINTS SENSOR (Missing messages)
B0096:87-CA - RIGHT SIDE RESTRAINTS SENSOR 1 (Missing messages)
B2840:13-CA - Unknown Error (Circuit Open)
B2841:13-CA - Unknown Error (Circuit Open)

[majidali007]

When you put it inside the car, it causes all the lamps to go off, but when you put a new one in comparison, all the lamps go off.

[AST_Support]

Everything is fine on the bench, maybe there is a problem with the car.
Do a full diagnostic on the car to determine what problem we are dealing with.

[majidali007]

Same like this

[majidali007]

But when im using another one working module all lamp is gone

[AST_Support]

It is possible that the SRS ECU is damaged after the impact and some sensors are not working properly. Perform a full diagnostic on a vehicle with a malfunctioning SRS ECU.

[majidali007]

Thanks for reply i will try best

[digiauto]

If you clear crash you have to calibrate the sensors with honda HDS or even x431 launch does it. Callibrate the seat and then go into ABS and go to calibrate all sensors and light will be off!

If you put new module in from dealer, light off automatically but NOT when you clear crash, you have to calibrate, I'm sure 100% done many and only new module from dealer auto calibrates.