Isuzu D-max Autoliv 898146938Y_XC2361A-72F

[sattvv]

Hello
Need Clear crash for Isuzu Dmax With Autoliv 898146938Y But the processor is a xc2361a 72F
Can anyone help me Please?
I tried with Airbag Service Tool but it doesn't work, there are two errors B005200 and B005202
Thank you in advance

[smart-prog]

What Error code in Original file?
Read and post all data banks!

[sattvv]

Hello
It's all here

Isuzu D-Max Autoliv 898146938Y (diag only)
-----------------------------------------------------------
Enable 12V on Extended Connector... ok
External power +12,59V
Connect...
Part Number... failed
VIN Number... MPATFS87JJT013084
Read Errors...
B100A:00 - Unknown Error
B0085:39 - LEFT FRONT SIDE IMPACT SENSOR
B0086:39 - RIGHT FRONT SIDE IMPACT SENSOR
B0083:39 - FRONT IMPACT SENSOR 1
B0084:39 - FRONT IMPACT SENSOR 2
B0087:39 - LEFT REAR SIDE IMPACT SENSOR
B0088:39 - RIGHT REAR SIDE IMPACT SENSOR
B0052:00 - !!! DEPLOYMENT COMMANDED
B0052:02 - !!! DEPLOYMENT COMMANDED
B1001:00 - OPTION CONFIGURATION
B2498:39 - Unknown Error
B0014:0D - DRIVER SEAT SIDE AIR BAG DEPLOYMENT LOOP
B1009:36 - Unknown Error
U0073:39 - CAN BUS COMMUNICATION
B0016:0D - LEFT ROOF RAIL AIR BAG DEPLOYMENT LOOP
B0023:0D - RIGHT ROOF RAIL AIR BAG DEPLOYMENT LOOP
B0021:0D - PASSENGER SEAT SIDE AIR BAG DEPLOYMENT LOOP

Thank you

[AST_Support]

Test this file, pass PM

[sattvv]

Hello
this is with the new dump

Enable 12V on Extended Connector... ok
External power +12,55V
Connect...
Part Number... failed
VIN Number... MPATFS87JJT013084
Read Errors...
B100A:00 - Unknown Error
B0085:39 - LEFT FRONT SIDE IMPACT SENSOR
B0086:39 - RIGHT FRONT SIDE IMPACT SENSOR
B0083:39 - FRONT IMPACT SENSOR 1
B0084:39 - FRONT IMPACT SENSOR 2
B0087:39 - LEFT REAR SIDE IMPACT SENSOR
B0088:39 - RIGHT REAR SIDE IMPACT SENSOR
B0052:00 - !!! DEPLOYMENT COMMANDED
B0052:02 - !!! DEPLOYMENT COMMANDED
B1001:00 - OPTION CONFIGURATION
B2498:39 - Unknown Error
B0014:0D - DRIVER SEAT SIDE AIR BAG DEPLOYMENT LOOP
B0016:0D - LEFT ROOF RAIL AIR BAG DEPLOYMENT LOOP
B0023:0D - RIGHT ROOF RAIL AIR BAG DEPLOYMENT LOOP
B0021:0D - PASSENGER SEAT SIDE AIR BAG DEPLOYMENT LOOP

[AST_Support]

pass the same

[sattvv]

Did not work
There are no more errors, but when switching on the ignition, the LED blinks 5 times and then goes out!!
The problem is that when the circuit of an airbag is disconnected, it does not report a fault

[AST_Support]

But on bench everything seems to be ok.
What LED blinks 5 times? SRS warning light? If it goes out it means all tests passed and arm state is on.
Try to disconnect another airbags and check errors and SRS warning light.

[sattvv]

it doesn't work regardless of which airbag you disconnect, it doesn't report an error

[AST_Support]

Test this file

[sattvv]

Hello
Thank you
This works