Tweet
The photo shown for pin out is incorrect, can you send me the correct pin out for this please
-
You do not have permission to view this gallery.
This gallery has 1 photos. -
Test this pinout. -
can you please check does not clearYou do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
You need to read EEPROM 25040 and use AirbagServiceTool to clear crash in it.Comment
-
Hi
Could you please see below dump file and see if its correct? I have read this dump and cleared errors using AST, But since that it gives me B0100...Today, 00:15 -
Reply to 2018 ram 3500, 68346751aa 95256HI the file it's not working, it's the same issue, I tried both files that you sent me, I waiting for a good response thank you....Yesterday, 17:53
-
Reply to Suzuki spacia module lostMistakes happen, and no one is secured from them.
In most cases, it is enough to check the GND pin to the metal case with a multimeter.18.05.2024, 18:03 -
Reply to Suzuki spacia module lostThis is 100% okay im done this pinouts many modules working good...18.05.2024, 17:58
-
Reply to Suzuki spacia module lostNow i am afraid after this module lost.due to wrong type of connection in Software Added.18.05.2024, 17:52
-
Reply to Suzuki spacia module lostYes, there are some bugs in the program that we always fix.
But your connector is different from the one in the picture. You should have asked about...18.05.2024, 16:11 -
This problem i have also facing .check three other same part num .but no luck18.05.2024, 15:57
-
I open sensor and found processor R5F2154You do not have permission to view this gallery.
This gallery has 1 photos.18.05.2024, 14:18 -
COMPANY suzuki
car spacia
year 2019
part num 38910-79R0
mcu R7F701A383
hello admin the above part num which shows in software...18.05.2024, 13:19 -
Reply to 1005273-00-fLight still on because of this error.
B1315:04-81 - !!! CRASH DATA STORED !!! (System Internal Failure)
Try automatic mode without a resi...18.05.2024, 12:12 -
Reply to 1005273-00-fTesla Model S Delphi 1005273-00-F (on bench with RES1K)
1. Connect and Read DTC
2. Disassamble Airbag ECU and solder resistor 1kOm as shown...18.05.2024, 11:10 -
-
Reply to Ford Ka 51925901 Internal errorHi it’s not a data issue. The original dump is working ok on another ecu. It’s down to some component on the pcb, just seeing if anyone...17.05.2024, 19:26
-
Reply to AUTOLIVE 630429200A Fiat FiorinoIf there is no internal error, try this file....17.05.2024, 18:55
-
Comment