Hyundai 95910-1K100

[jmma]

Hi, this airbag unit is listed on ACST, but fails enter bootlader.


Processing... 02.11.2021 16.55.51
Checking New Version... ok
Connection to server... ok
Checking security... ok
External power +14,54V
Start Automatic Mode for 95910-1K100
Processing...
Enable 12V on Extended Connector... ok
External power +14,6V
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
95910-1K100
Set ServiceMode... ok
Read Errors...
B1650:E0 - !!! CRASH RECORDED in 1st Stage Only Frontal !!!
B1329:E0 - FIS Front Impact Sensor -Driver Communication error
B1334:E0 - FIS Front Impact Sensor -Passenger Communication error
B1409:E0 - SIS Side Impact Sensor Front-Driver Communication Error
B1410:E0 - SIS Side Impact Sensor Front-Passenger Communication Error
B2500:E0 - Warning lamp Failure
B1527:E0 - Passenger Airbag on-off switch open or short to Battery
B1378:E0 - Side Airbag Front-Driver Resistance too High
B1382:E0 - Side Airbag Front-Passenger Resistance too High
B1473:E0 - Inflatable Curtain Airbag Front-Driver Resistance too High
B1477:E0 - Inflatable Curtain Airbag Front-Passenger Resistance too High

Enable 12V on Extended Connector... ok
External power +14,48V
Set ServiceMode... failed
Set ServiceMode... ok
Enter security 1... ok
Enter security 2... ok
Set ServiceMode... ok
Enter security 3... ok
Set Bootloader Addr... ok
Load Bootloader... ok
Enter Bootloader... failed




Any solution to this please?

[smart-prog]

Try Again!