Hyundai Kona 2020 95910-CM200 need help!

[calin.manitiu]

I have tried to clear the crash data, but I get a Bad dump error.
I guess someone tried to clear it before me and wrote a bad (incorrect) dump. Is there any way to get a correct dump for it?
Here is the log:

Processing... 23.03.2021 10.20.32
Checking New Version... ok
Connection to server... ok
Checking security... ok
External power +12.45V
Start Automatic Mode for 95910-CM200 (diag)
Processing...
Enable 12V on Extended Connector... ok
External power +11.75V
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
95910-CM200
Read Errors... ok
B1650:00-89 - !!! SRSCM CRASH RECORDED !!!
B1649:00-89 - !!! CRASH RECORDED - ROLLOVER EVENT !!!
B2505:00-89 - PASSENGER AIRBAG ON/OFF WARNING LAMP FAILURE
B1329:00-89 - FIS(FRONT IMPACT SENSOR)-DRIVER COMMUNICATION ERROR
B1409:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-DRIVER COMMUNICATION ERROR
B1742:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS(FRONT IMPACT SENSOR)-PASSENGER COMMUNICATION ERROR
B1410:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-PASSENGER COMMUNICATION ERROR
B1748:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-PASSENGER COMMUNICATION ERROR
B1378:00-89 - SIDE AIRBAG FRONT-DRIVER RESISTANCE TOO HIGH
B1382:00-89 - SIDE AIRBAG FRONT-PASSENGER RESISTANCE TOO HIGH
B1473:00-89 - INFLATABLE CURTAIN AIRBAG DRIVER RESISTANCE TOO HIGH

Bad Dump

[stundentas]

NEW TOPIC TEMPLATE

Every new topic with dump file MUST contain those paragraphs
CAR BRAND NAME:
MODEL:
PART NUMBER:
CPU / EEPROM:
+ at least 4 pictures: of case with sticker, both sides of PCB and zoomed CPU (do NOT resize pictures!)

[stundentas]

I have tried to clear the crash data, but I get a Bad dump error.
I guess someone tried to clear it before me and wrote a bad (incorrect) dump. Is there any way to get a correct dump for it?

if you will get good file , you will have problem anyway , because there you will need to get code for your car to configure srs unit and it posible if you have original diagnostic equipment with online.

[smart-prog]

I have tried to clear the crash data, but I get a Bad dump error.
I guess someone tried to clear it before me and wrote a bad (incorrect) dump. Is there any way to get a correct dump for it?
Here is the log:

Processing... 23.03.2021 10.20.32
Checking New Version... ok
Connection to server... ok
Checking security... ok
External power +12.45V
Start Automatic Mode for 95910-CM200 (diag)
Processing...
Enable 12V on Extended Connector... ok
External power +11.75V
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
95910-CM200
Read Errors... ok
B1650:00-89 - !!! SRSCM CRASH RECORDED !!!
B1649:00-89 - !!! CRASH RECORDED - ROLLOVER EVENT !!!
B2505:00-89 - PASSENGER AIRBAG ON/OFF WARNING LAMP FAILURE
B1329:00-89 - FIS(FRONT IMPACT SENSOR)-DRIVER COMMUNICATION ERROR
B1409:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-DRIVER COMMUNICATION ERROR
B1742:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS(FRONT IMPACT SENSOR)-PASSENGER COMMUNICATION ERROR
B1410:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-PASSENGER COMMUNICATION ERROR
B1748:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-PASSENGER COMMUNICATION ERROR
B1378:00-89 - SIDE AIRBAG FRONT-DRIVER RESISTANCE TOO HIGH
B1382:00-89 - SIDE AIRBAG FRONT-PASSENGER RESISTANCE TOO HIGH
B1473:00-89 - INFLATABLE CURTAIN AIRBAG DRIVER RESISTANCE TOO HIGH

Bad Dump

Please Post You DUMP!

[calin.manitiu]

That's my problem! I have no dump. When I try to clear crash with AirBagCANServiceTool, I get the message with Bad Dump, as in the log I have posted.
I have activated the CPT for Infineon today and I will try to read it later today.

[smart-prog]

This ECU inside have TC23xx CPU, SMART-OBD make only 95910-CM200 (diag). Read and Clear errors code!
I check and fixed this error. Thanks! For info!
You Use Automatic Mode!

[calin.manitiu]

Please Post You DUMP!

Here's the dump!
I guess clearing it now in AST should be ok, right?

[smart-prog]

Yes!!!! After Write to ecu connect to Smart-OBD and Check error code and make clear error!
Remember if you put 12 volt ECU not rotate!

[Rclassic]

I received my order today, SMART-OBD
Before buying I asked on the web for this specific airbag model, if only with SMART-OBD and ATS I could clean it, and they said yes, but I don't see the way, just read and erase errors.
What I can do?

[smart-prog]

Please POST ParyNumber?

[Rclassic]

Please POST ParyNumber?

same unit...
95910-CM200
334933-147
HW ver: 1.00
SW ver: 1.00

[smart-prog]

Select C4000 and try READ!

[Rclassic]

Nothing...

Enable 12V on Extended Connector... ok
External power +12,7V
Set ServiceMode... failed
No answer from AirBag, check Airbag connection and power supply

[smart-prog]

If you select 95910-CM200 read error code OK?

[Rclassic]

Yes, cm200 read ok, but not option to read eeprom.

This is new conection, trougt obd port not lateral port... whit c4000 module selected

Enable 12V on Extended Connector... ok
External power +12,65V
Set ServiceMode... ok
Read ECU Delivery Assembly Number...
95910-CM200
Read Errors... ok
B1650:00-89 - !!! SRSCM CRASH RECORDED !!!
B2500:00-89 - SRS WARNING LAMP FAILURE
B1527:00-89 - PASSENGER AIRBAG ON/OFF SWITCH OPEN OR SHORT TO BATTERY
B2505:00-89 - PASSENGER AIRBAG ON/OFF WARNING LAMP FAILURE
B1329:00-89 - FIS(FRONT IMPACT SENSOR)-DRIVER COMMUNICATION ERROR
B1409:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-DRIVER COMMUNICATION ERROR
B1742:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-DRIVER COMMUNICATION ERROR
B1334:00-89 - FIS(FRONT IMPACT SENSOR)-PASSENGER COMMUNICATION ERROR
B1410:00-89 - SIS(SIDE IMPACT SENSOR) FRONT-PASSENGER COMMUNICATION ERROR
B1748:00-89 - P-SIS(SIDE IMPACT SENSOR PRESSURE) FRONT-PASSENGER COMMUNICATION ERROR
B1378:00-89 - SIDE AIRBAG FRONT-DRIVER RESISTANCE TOO HIGH

Enable 12V on Extended Connector... ok
External power +12,67V
Set ServiceMode... failed