Fusion LS7T-14B321-FA

[Elder]

CAR BRAND NAME:Ford
MODEL:Fusion
YEAR:2019
PART NUMBER:LS7T-14B321-FA
CPU / EEPROM:R7F701A033
Hello.
Please help to clear the crash. The SRS block is in the SmartOBD diagnostics and not in the AST tool.
I clean the dump from a crash following the example of similar blocks in the AST tool. I write the cleaned
dump and check it with Smart OBD. I erase the Errors. Check if the crash was deleted. I turn off the power
to the SPS unit, wait 30 seconds. I turn on the power to the SRS unit, I read the errors using the Smart OBD
and the collision record is again there.

[smart-prog]

ECU assembled and have normal possition? If put 12 volt not rotate!!!

[SLICK]

My experience of this is same, as long you are 100% sure you clear alog correct and write back. On bench will always show crash but always a different case when installed in car.

Must try in car!

br

slick

[Elder]

My experience of this is same, as long you are 100% sure you clear alog correct and write back. On bench will always show crash but always a different case when installed in car.

Must try in car!

br

slick

Hi.The car is not in my service.
Okay, I'll try to give the unit to the car for installation.
I will report the result.
Best regards.